gromeck / BLE-Scanner

ESP32-based Bluetooth Low Energy (BLE) scanner to report presence of bluetooth devices into an MQTT service.

gromeck/BLE-Scanner Issues

Can't find EEPROM.h in Arduino IDE
Updated 2 days ago
Running BLE-Scanner in Platformio
Updated 22 days ago2
ble-manufacturer-list.h missing - create from with bash
Updated 9 months ago2
Question about documentation
Closed 9 months ago4
How can I reset the web interface creds?
Closed 9 months ago2
include Name in every output on mqtt
Closed 9 months ago2
Web Frontend Access
Closed 2 years ago4
additional libraries are requires not listed in the install guide
Closed 2 years ago2
Add all scanned devices to the scan list, but publish only the ones with public addresses
Updated 3 years ago
Implement OTA firmware update
Closed 3 years ago1
don't store devices which use random addresses
Closed 3 years ago1
Publish only changed attributes via MQTT
Closed 3 years ago1
Get the appearance from each device
Updated 3 years ago1
Deadlock in BLE library when retrieving battery characteristics
Closed 9 months ago3
Show a hint if configuration was modified, but the device wasn't restarted
Closed 3 years ago1
set correct timezone
Closed 3 years ago1
disable basic authentication in configuration mode
Closed 3 years ago1
retrieve the battery status of the BT device
Closed 3 years ago1
Automatically return to operational mode if no activity is registered in configuration mode
Closed 3 years ago1
Don't store this really big vendor list -- instead use an online lookup API
Closed 3 years ago2
store the MACADDR in the vendor list more compact
Closed 3 years ago1
Improve the lookup for vendors
Closed 3 years ago2
keep the list of detected BT devices
Closed 3 years ago3
implement a scan for non-BLE bluetooth devices
Closed 3 years ago1