Crossover PCB layout for Paul Carmody's Speedster speakers. Designed with V-cut stackable boards for high and low-pass circuits.
![Back render](https://raw.githubusercontent.com/gregose/speedster-crossover/master/images/speedster-crossover_back.png)
![Schematic](https://raw.githubusercontent.com/gregose/speedster-crossover/master/images/speedster-crossover_schematic.png)
The layout was designed for the following components. Extra pads have been added to allow the use of physically smaller capacitors. Additional pins have been added to X1 and X2 to support the use of through-hole quick disconnects.
Ref |
Component |
Link |
R1 |
Vishay Mills MRA-12 10R |
http://www.digikey.com/product-search/en?mpart=MRA-1210R00FE12&vendor=541 |
R2 |
Vishay Mills MRA-12 8R |
http://www.digikey.com/product-search/en?mpart=MRA-128R000FE12&vendor=541 |
C1 |
AUDYN CAP PLUS MKP 2.20 MF/ 800 V 2% AXIAL 43X25 |
https://www.intertechnik.com/Shop/Cross-over-parts/Capacitors/Audyn-Cap-Plus/_PLUS22008_1768,en,280,46735 |
C2 |
AUDYN CAP PLUS MKP 4.70 MF/ 800 V 2% AXIAL 63X35 |
https://www.intertechnik.com/Shop/Cross-over-parts/Capacitors/Audyn-Cap-Plus/_PLUS47008_1768,en,280,46738 |
C3 |
AUDYN CAP PLUS MKP 4.70 MF/ 800 V 2% AXIAL 63X35 |
https://www.intertechnik.com/Shop/Cross-over-parts/Capacitors/Audyn-Cap-Plus/_PLUS47008_1768,en,280,46738 |
L1 |
Meniscus Audio .25mH, Perfect Layer 20ga. |
http://meniscusaudio.com/025mh-20ga-p-597.html |
L2 |
Meniscus Audio 1.5mH, Layer Wound 18ga. |
http://meniscusaudio.com/150mh-18-ga-p-638.html |
L3 |
Meniscus Audio .35mH, Layer Wound 18ga. |
http://meniscusaudio.com/035mh-18-ga-p-622.html |
X1 |
Phoenix Contact 1730418 (CONN TERM BLOCK 4POS 5.08MM) |
http://www.digikey.com/product-search/en?mpart=1730418&vendor=277 |
X2 |
Phoenix Contact 1730434 (CONN TERM BLOCK 6POS 5.08MM) |
http://www.digikey.com/product-search/en?mpart=1730434&vendor=277 |
X1/2 Alt. |
PCB quick disconnect terminal |
http://www.mcmaster.com/#7956k5/=10cwxu4 |