grblHAL / core

grblHAL core code and master Wiki

grblHAL/core Issues

Teensy 4.1 Mysterious dropped or added characters in gcode over USB
Closed 19 hours ago4
Controllo motore Nidec con mks dlc32 e CLK (no PWM)
Updated 19 hours ago8
When homing is ongoing real-time report requests are ignored？
Closed 3 days ago3
G2 that triggers an ARC_ANGULAR_TRAVEL_EPSILON related calculation error
Updated 3 days ago3
Request for assigned settings for toolsetter moves
Updated 8 days ago2
can't get rid of "error:79" on first dry run
Closed 11 days ago1
set machine origin to 0, or bit3, not working for $22
Closed 16 days ago5
MKS TinyBee problem
Updated a month ago1
probe enabled by default
Closed a month ago1
Macro Issue that I can not figure out.
Closed a month ago6
Typo in settings.c
Updated a month ago1
$150 - $153 does not work on SKR Pico
Closed a month ago2
Web Builder is not available in China
Closed a month ago2
Are the all inputs like e-stp, homming, probe, pins pullup ?
Updated a month ago1
Lathe Diameter/Radius offset report issue
Closed a month ago1
Experiencing issues with ESP32 Blackbox Build
Closed 2 months ago10
Syntax error / typo in ngc_expr.c
Updated 2 months ago3
Delta Kinematics: Y axis moves are not executing correctly - Motor duplication?
Closed 2 months ago1
How to limit the maximum output pulse frequency to prevent the user from setting an excessively high pulse rate that could cause grblHAL to crash?
Closed 2 months ago1
Not correctly reporting coordinates?
Closed 2 months ago4
octopus max STM32H723
Closed 2 months ago1
Is the data in the driver capabilities list dependably up to date?
Closed 2 months ago2
regression in websocket init_message caused by commit a912ce4
Updated 2 months ago1
I noticed that the current Setting_AxisStepsPerMM setting has 5 zeros after the decimal point. Is there any reason for doing this?
Closed 3 months ago2
Tool table offsets are not persistent over power cycle
Updated 3 months ago6
kinda vfd support
Updated 3 months ago3
Joggin unavailable for many commands
Updated 3 months ago3
Not an issue: Want to know if macro variables are available for $342 to $344.
Updated 3 months ago3
No reset in alarm?
Closed 3 months ago2
Dust Collection Pin Invert?
Closed 3 months ago2
GrblHAL Web Builder Build failed: 422 - SAM3X8E
Closed 3 months ago6
Need Help to set up grblHAL
Closed 3 months ago12
MKS Tinybee cannot connect to the router using STA
Closed 3 months ago3
Cannot Restore After Feedhold When Issued During Change of Spindle State
Closed 3 months ago10
MPG behavior/documentation
Closed 3 months ago2
Macro is giving error about not running from filesystem when it is.
Closed 3 months ago2
protocol_enqueue_gcode does not set last_error
Updated 3 months ago3
Polar kinematic. Feedrate and go to G0 X0 Y0 after program executing
Updated 4 months ago3
Axis remapping?
Closed 4 months ago2
Setting $61 (coolant on delay) not visible without safety door enabled
Closed 4 months ago1
ioport_settings_load bug in out ports
Closed 4 months ago1
MOBUS => MODBUS
Closed 4 months ago1
Clear TLO reference on homing cannot be handled by plugins
Closed 4 months ago5
spindle_add_null does not fill .esp32_off which leads to crash
Closed 4 months ago1
spindle_get_caps() hardfault after NVS reset
Closed 4 months ago3
Notice of some bugs either from HAL Core or vanilla grbl
Updated 4 months ago2
Bug with probing 4 axes in motion control.c
Closed 4 months ago1
Wrong spindle mask?
Closed 4 months ago3
Qestion about min/max values
Closed 5 months ago4
please add 5-axis rtcp support
Updated 5 months ago2