The hardware referenced in this repository is no longer supported by Graphcore. Information and tools are provided here without warranty or support in the hope that they will be useful to hobbyists and computer historians.
Please read any licenses and the EULA before using the software: EULA.
This repository contains information and tools for the legacy products listed below:
Graphcore’s dual IPU PCIe card with two GC2 Colossus IPUs. The GC2 was Graphcore's first (Mk1) chip. The card provides performance of 250 TFLOPS/s of mixed precision compute with 192 GB/s IPU-Link bandwidth between IPUs, 128 GB/s card to card IPU-Links. Maximum power consumption is 300 W.
⚠ The C2 card was designed for use in data centres and requires active cooling. The chassis fans must provide sufficient airflow through the fins to keep it operating safely at peak performance.
C2 Resources available:
The icuflash tarball contains a document describing how to use the icuflash tool.
You need to complete the checks in the “Before Starting” section before upgrading the firmware.
The commands that correspond to steps 1 to 5 for upgrading from 1.3.XX firmware to 1.4.14 firmware for all attached C2 cards are the following:
./icuflash image -a -f sudo reboot
./icuflash keys --update -k 0 -a -f ./icuflash keys --update -k 1 -a -f
./icuflash image -a -f sudo reboot
./icuflash image -a -f sudo reboot