gordonshieh / MMA8452Q

3-Axis Digital Accelerometer

MMA8452Q

MMA8452Q 3-Axis Digital Accelerometer

The MMA8452Q device, provides digital acceleration for X, Y and Z axis.

This Device is available from ControlEverything.com [SKU: MMA8452Q_I2CS]

https://www.controleverything.com/content/Accelorometer?sku=MMA8452Q_I2CS

This Sample code can be used with Raspberry Pi, Arduino, Particle Photon, Beaglebone Black and Onion Omega.

Java

Download and install pi4j library on Raspberry pi. Steps to install pi4j are provided at:

http://pi4j.com/install.html

Download (or git pull) the code in pi.

Compile the java program.

$> pi4j MMA8452Q.java

Run the java program.

$> pi4j MMA8452Q

Python

Download and install smbus library on Raspberry pi. Steps to install smbus are provided at:

https://pypi.python.org/pypi/smbus-cffi/0.5.1

Download (or git pull) the code in pi. Run the program.

$> python MMA8452Q.py

Arduino

Download and install Arduino Software (IDE) on your machine. Steps to install Arduino are provided at:

https://www.arduino.cc/en/Main/Software

Download (or git pull) the code and double click the file to run the program.

Compile and upload the code on Arduino IDE and see the output on Serial Monitor.

Particle Photon

Login to your Photon and setup your device according to steps provided at:

https://docs.particle.io/guide/getting-started/connect/photon/

Download (or git pull) the code. Go to online IDE and copy the code.

https://build.particle.io/build/

Verify and flash the code on your Photon. Code output is shown in logs at dashboard:

https://dashboard.particle.io/user/logs

C

Setup your BeagleBone Black according to steps provided at:

https://beagleboard.org/getting-started

Download (or git pull) the code in Beaglebone Black.

Compile the c program.

$>gcc MMA8452Q.c -o MMA8452Q

Run the c program.

$>./MMA8452Q

Onion Omega

Get Started and setting up the Onion Omega according to steps provided at :

https://wiki.onion.io/Get-Started

To install the Python module, run the following commands:

opkg update

opkg install python-light pyOnionI2C

Download (or git pull) the code in Onion Omega. Run the program.

$> python MMA8452Q.py

#####The code output is raw value of acceleration in X, Y and Z Axis.