goldage's repositories
arduino-pico
Raspberry Pi Pico Arduino core, for all RP2040 boards
Arduino_Core_STM32
STM32 core support for Arduino
aw-doc
allwinner chip doc
Awesome-Cellular-Hacking
Awesome-Cellular-Hacking
BoloRTT
BoloPi software code base on rtthread f1c100s
CatSniffer
CatSniffer is an original multiprotocol, and multiband board made for sniffing, communicating, and attacking IoT (Internet of Things) devices. It was designed as a highly portable USB stick that integrates the new chips TI CC1352, Semtech SX1262, and Microchip SAMD21E17.
CherryUSB
Tiny and portable USB device/host stack for embedded system with USB IP
esp32-tinyemu
A fork to Fabrice Bellard's TinyEmu ported to ESP32
FNIRSI-1013D-1014D-Hack
Resources gathered for reverse engineering the FNIRSI 1013D and 1014D scopes
gitignore
A collection of useful .gitignore templates
ImHex
🔍 A Hex Editor for Reverse Engineers, Programmers and people who value their retinas when working at 3 AM.
LDD-LinuxDeviceDrivers
Linux内核与设备驱动程序学习笔记
ldd3
Linux Device Drivers 3 examples updated to work in recent kernels
lucide
Simply beautiful open source icons, community-sourced
MiniRover-Hardware
自制火星车的开源资料。
MQ-Pro
MQ-Pro (based D1)
nfc-emu
NFC模拟器
nfc-laboratory
NFC signal and protocol analyzer using SDR receiver
nfcgate
An NFC research toolkit application for Android
openhaystack
Build your own 'AirTags' 🏷 today! Framework for tracking personal Bluetooth devices via Apple's massive Find My network.
os_kernel_lab
OS kernel labs based on Rust/C Lang & RISC-V 64/X86-32
Proxmark3GUI
A cross-platform GUI for Proxmark3 client | 为PM3设计的图形界面
sd-fuse_rk3399
Create bootable SD card for NanoPC-T4/NanoPi M4/NanoPi NEO4
smartknob
Haptic input knob with software-defined endstops and virtual detents
ssd1306
ssd1306 full function driver
stm32f429
Keil projects and libraries for STM32F4xx devices
Tasmota
Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at
TeenyUSB
Lightweight USB device and host stack for STM32 and other MCUs. Ready for USB 3.0 device.