efm32isp
WTF?
EFM32 UART programmer, see application note 3 (http://downloads.energymicro.com/an/pdf/an0003_efm32_serial_bootloader.pdf)
Prerequisites
- python2 v2.7 or newer (xmodem and pyserial are not python3 compatible!)
- xmodem-library (https://pypi.python.org/pypi/xmodem)
- pyserial (https://pypi.python.org/pypi/pyserial)
- docopt (https://pypi.python.org/pypi/docopt/0.6.1)
Usage
Usage:
efm32isp [options] <binfile>
Options:
-h --help Prints this help message
-p <port>, --port=<port> Sets the UART port, any valid pyserial string is possible [default: /dev/ttyUSB0].
-b <port>, --baud=<baud> Sets the UART baud rate [default: 57600].