| Configuration | Model |
|---|---|
| CPU | Intel core i3 10105 |
| Motherboard | GIGABYTE B460M AORUS PRO (rev. 1.0) ara May 2020 |
| Graphics card | Intel® UHD Graphics 630 |
| RAM | G.SKILL Ripjaws V 2x8GB 2800 MHz |
| Disk | SSD KINGSTON A2000 250GB M.2 NVMe |
| Monitor | 2* AOC 24B1XH5 24" IPS 75Hz FHD |
| WiFi adapter | USB TP-Link TL-WN725N Wireless N150Mbps |
Note 1: If you using single screen, all is good. Else, you using dual screen => See Issues chapter.
Note 2: Because Motherboard only support 1 gate HDMI, 1 DP, 1 DVI and my monitor only support HDMI. So i must using adapter convert from DP to HDMI for second screen
- Supports all 10-generation CPUs with UHD630 cores e.g: i3 10100, i5 10400, i5 10500...
- The 10th generation CPU of non-core display with F can also have the following independent display without drive (but cannot use nuclear display acceleration)
- Support UHD630 graphics card with only CPU core display
- Support AMD RX 470/480/570/570X/580/580X/590 series graphics cards. See also other hackintosh with this configuration Here
- Support AMD RX 5500/5600/5700 series graphics cards (dedicated config.plist required)
PS: To use the independent display, you need to forcibly turn on the CPU core display in the BIOS (Advanced -> Built-in display configuration -> Integrated graphics multi-monitor (IGD Multi-monitor) -> Allow), otherwise the core display hardware decoding will fail and only use the core Obviously can be ignored
OpenCore: 0.6.9
macOS version: 10.15.7 (19H15)
EFI download link: Download
I used default setting for Commet Lake in OpenCore guide.
I using USB TP-Link TL-WN725N Wireless N150Mbps, you can follow official guide Here or download in releases of this repo Here
| Summary | Illustrator | Description |
|---|---|---|
| Startup issue |  |
If you see screen same as beside, don't worry. Only press Power button of screen 2 times. You can off and on any screen, it's work! |
| Config 2 screen |  |
If you using 75Hz screen, must change to 75Hz in System Preferences > Displays |