geode-sdk / loader

The Geode Mod Loader

Note: This repo has been archived! All further loader development is happening over at the main Geode repository.

Loader

Repository for the Geode Mod Loader

Documentation

See docs

Building

Prerequisites:

• CMake (minimum v3.13.4)
• A supported C++ compiler (clang/MSVC)
• Geode CLI (Highly Recommended)
• git (Highly Recommended)

Quick instructions (for thigh-high programmers)

1. git clone

2. mkdir build; cd build; cmake .. -T host=x64 -A win32

3. cmake --build

Recommended way (for newbies)

1. Install VS Code

2. Install the C/C++ and CMake Tools extensions for VS Code

3. Open up the command line and navigate to any directory where you'd like to build the loader

4. git clone https://github.com/geode-sdk/loader --recurse-submodules

5. Open up the directory in VS Code

6. Press F1 to open the Command Palette and run CMake: Configure (make sure to select an x86 generator)

7. Open up the Command Palette again and run CMake: Select Variant (select either Release or RelWithDebInfo)

8. Click Build on the bottom status bar or run CMake: Build