G. X. X's repositories
rx5808-Diversity-RealAcc-Compatible
RX5808 Diversity RealAcc Compatible
arduino-builder
A command line tool for compiling Arduino sketches
arduino-mcp2515
Arduino MCP2515 CAN interface library
Arduino_STM32
Arduino STM32. Hardware files to support STM32 boards, on Arduino IDE 1.8.x including LeafLabs Maple and other generic STM32F103 boards. There is also Alpha support for GD32F103 based boards
Artery-AT32-PlatformIO
PlatformIO platform and framework for Artery AT32 MCU
CC1101-ESP-Arduino
ESP8266 / ESP32 / Arduino driver lib for using the great TI C1101 transceiver
esp8266_deauther
ESP8266 deauther
CANPower
Accessory power controller for BMW CAN bus bikes
Easy-IoT-Arduino-CC1101
An easy to use Arduino library to send and receive messages between IoT devices (such as the ESP32's or Arduino devices) when using the Texas Instruments CC1101 Low-Power Sub-1GHz RF Transceiver
esp32-mcp2515
MCP2515 CAN interface library for using on esp32/esp8266
ESPboy_Sub1GhzScanner
ESPboy Sub1GhzScaner using CC1101 module
MTool
Nodemcu RF433 Tool
nucleo_L476RG_1kHz_sine_with_100_samples_DMA
making 1kHz sine wave with 100 samples using DMA
Nucleo_L476RG_DAC
Playing WAV data with Nucleo-L476RG DAC
RaceFlight-One
RaceFlight One
RadioLib
Universal wireless communication library for embedded devices
ResponsiveAnalogRead
Arduino library for eliminating noise in analogRead inputs without decreasing responsiveness.
RFmoggy
NodeMCU ESP8266 CC1101 Sub1GHz OOK transmitter & brute forcer w/ pre-saved signals (e.g. TouchTunes Jukebox)
RollJam
Uses CC1101's to create a replay attack against rolling codes
ssd1327
This is the ssd1327 driver package for 128X96 oled display.
stm32-ssd1306
STM32 library for working with OLEDs based on SSD1306, SH1106, SH1107 and SSD1309, supports I2C and SPI
Willy_Firmware_CC1101_ESP32_Display_Touchscreen
Willy Firmware is an alternative to Flipper Zero. | Board: ESP32 T-Display-S3 - Module: CC1101 - Display: Touchscreen - Compatible Flipper Zero file.