futaris / meta-riscv

OpenEmbedded/Yocto layer for RISC-V Architecture

meta-riscv

RISC-V Architecture Layer for OpenEmbedded/Yocto

Description

This is the general hardware specific BSP overlay for the RISC-V based devices.

More information can be found at: https://riscv.org/ (Official Site)

The core BSP part of meta-riscv should work with different OpenEmbedded/Yocto distributions and layer stacks, such as:

• Distro-less (only with OE-Core).
• Angstrom.
• Yocto/Poky (main focus of testing).

Dependencies

This layer depends on:

• URI: git://github.com/openembedded/openembedded-core
  • branch: master
  • revision: HEAD
• URI: git://github.com/openembedded/bitbake
  • branch: master
  • revision: HEAD

Quick Start

Note: You only need this if you do not have an existing Yocto Project build environment.

Make sure to install the repo command by Google first.

Create workspace

mkdir riscv-yocto && cd riscv-yocto
repo init -u git://github.com/riscv/meta-riscv  -b master -m tools/manifests/riscv-yocto.xml
repo sync
repo start work --all

Update existing workspace

In order to bring all layers uptodate with upstream

cd riscv-yocto
repo sync
repo rebase

Setup Build Environment

. ./meta-riscv/setup.sh

Build Image

A console-only image

bitbake core-image-full-cmdline

Basic image without X support suitable for Linux Standard Base (LSB) implementations. It includes the full meta-toolchain, plus development headers and libraries to form a standalone (on device) SDK

bitbake core-image-lsb-sdk

Run in QEMU

runqemu nographic

Running wic.gz image on hardware

The output of the build will be a <image>.wic.gz file. You can write this file to an sd card using:

$ zcat <image>-<machine>.wic.gz | sudo dd of=/dev/sdX bs=4M iflag=fullblock oflag=direct conv=fsync status=progress

Sparse Image Creation

The output of the build can also be written to an SD card using bmaptool, the steps to do this are below:

$ MACHINE=freedom-u540 wic create freedom-u540-opensbi -e core-image-minimal
$ bmaptool create ./freedom-u540-opensbi-201812181337-mmcblk.direct > image.bmap
$ sudo bmaptool copy --bmap image.bmap ./freedom-u540-opensbi-201812181337-mmcblk.direct /dev/sdd

Maintainer(s)

• Khem Raj <raj dot khem at gmail.com>