Built with hugo, a static website generation tool.
-
Install hugo: https://gohugo.io/overview/installing/
-
Install nodejs: https://nodejs.org/en/download/package-manager/
-
Install gulp:
npm install --global --production gulp-cli && npm install
hugo server --renderToDisk
gulp watch
To use the Makefile you will need to create a Makefile.config. See the instructions at the top of the Makefile.config.example.
After you have a config file you can run make help to see options:
clean-build remove build artifacts.
clean-docker remove image.
clean-exe remove execs.
clean-integrations remove built integrations files.
clean-node remove node_modules.
clean-virt remove python virtual env.
clean clean all make installs.
docker-start start container and run default commands to start hugo site.
docker-stop kill the site and stop the running container.
docker-tests run the tests through the docker container.
hugpython build virtualenv used for tests.
source-helpers source the helper functions used in build, test, deploy.
start start the gulp/hugo server.
stop stop the gulp/hugo server.
To run the site with Docker (easier setup, slower server), you will need to install: https://docs.docker.com/engine/installation/#supported-platforms
To run the site without Docker and perform administrative tasks (compile metrics, create i18n placeholders, etc), you will need to:
-
Install hugo: https://gohugo.io/overview/installing/
-
Install nodejs: https://nodejs.org/en/download/package-manager/
-
Install Python3: https://www.python.org/downloads/ or https://github.com/pyenv/pyenv
Once the dependencies are installed you can run make start to start the site.
coming soon
- Always branch off of master; never commit directly to master.
- Name your branch
slack_handle/your_featureif you would like to create a preview site and run tests. - When you are ready to commit, create a new pull request to master from your branch.
- Fork the master branch
- When you are ready to commit make a pull request back to
DataDog/master
This site uses Blackfriday for markdown. To learn about the syntax, see this site.
If you include ANY Markdown in a file, give it an .md extension.
Make sure all files are lowercase. Macs are case insensitive when creating links to images and pages, but the server is not. The tests will be fine locally but the site will fail in production.
If you receive an error regarding There was a problem getting GitHub Metrics, please see the Github personal access token.
Within 5 minutes of merging to master, it will deploy automatically. You can see the status in the internal Datadog Slack #documentation channel.
Integrations include information that comes from two different sources. The first and main source are the files under content/integrations. The second source are the metric csv files under dogweb. In order to see the metric tables that appear for some of the integrations, you need to create an environment variable called github_personal_token assigned your github personal token (you need to have access to dogweb and therefore must be a Datadog employee to see this). The table will be brought in automatically by the deploy process.
The top of each integration file should include the following frontmatter:
---
title: Datadog-<integration name> Integration
integration_title: <integration name>
kind: integration
git_integration_title: <integration name>
doclevel: basic
---
If you are writing a lot about the integration, change doclevel to complete or just remove the whole line. Now write the doc. There is no need to update any index, menu, or sidebars. Those are automatically generated.
Most integrations start with a heading level of 3. Going forward you should start with 1. But if you do, make sure to add the newhlevel attribute to the frontmatter: newhlevel: true
Every integration should have the following format:
Absolutely Required.
The first thing in the Overview should be a representative image for the integration. Try to make it as interesting as possible.
The overview section is required and should be a paragraph or two with some bullets of what is interesting about this integration. For example, the following comes from the Docker integration.
Get metrics from Docker in real time to:
- Visualize your containers' performance.
- Correlate the performance of containers with the applications running inside.
There are three ways to setup the Docker integration: install the agent on the host, on a single priviledged container, and on each individual container.
Required with some exceptions
The installation section should cover anything that needs to be installed on the agent host. For instance, in the Docker installation section you learn about installing the agent into a container. If there is nothing to install on the agent host, this section can be left out. To be a complete integration, either an installation section or a configuration section must be included.
Required with some exceptions
The configuration section should cover anything that you can configure in the Datadog interface or the agent configuration files. In almost every case this section should be included since there is almost always something to configure. To be a complete integration, either an installation section or a configuration section must be included.
At the end of the configuration section include a link to the example configuration files. This should be done by adding {{< insert_example_links >}}. This method takes a few optional parameters: conf is the name of the example YAML file, minus the extension; check is the name of the check file, minus the .py extension; setting either check or conf to "none" will hide that line; include_intro set to false will show only the list minus the sentence at the top; normally the integration title in the links will come from the pages frontmatter, but setting integration will override that, yaml_extension will change the extension from example to something else (like "default").
Describe each of the options available in the YAML file. This will often be the stuff included in the YAML comments (remove them from the YAML included in the doc), but sometimes you will have to investigate a bit to figure out what the option is for.
Required
The validation section should include instructions on how to validate that the integration is successfully working.
Optional
The troubleshooting section should include anything that answers a question a user might have about the integration. If there is a question that comes up in support about the integration, it should be added here.
Required for integrations that have metrics
If the metrics are listed in the integration under dogweb, add an attribute to the frontmatter: git_integration_title: integration_name replacing the integration name with the name of the folder for the integration in the dogweb repo.
Then add {{< get-metrics-from-git >}} to the Metrics section. This renders all metrics for an integration. You can also selectively display metrics:
{{< get-metrics-from-git "system" "system.net.tcp.rtt" >}}
This will use your Github Personal Token to grab the metrics from the repo. For more information about setting up your Github Personal Token, see the Setup section above.
Optional
Include a list of events if the integration provides any.
Optional
Include a list of service checks if the integration provides any.
Optional
Include any links to Docs guides or Datadog blog articles that highlight the integration.
Create a markdown file under content/guides. Add the following front matter at the top of the file:
---
title: <guide title>
kind: guide
listorder: <where in the list you want the doc to appear>
---
Each guide has a listorder. Change the list order number of this doc and any other docs to make sure stuff appears in the right order. There is no need to update any index, menu, or sidebars. Those are automatically generated.
Integrations that have metrics will attempt to read the metrics metadata list from the Datadog web application repo. This requires read access to that repository and your Github Personal Token. If you are not a Datadog employee, please skip this step.
For more information on generating a token, see Github's documentation.
After you've generated a token, add the following line to the .bash_profile in your home directory:
export github_personal_token=[paste access token here]
You should then run source ~/.bash_profile to reload the settings.
Update your Makefile.config to:
FETCH_INTEGRATIONS = true