Nooploop LinkTrack UWB

Overview

Unofficial Nooploop LinkTrack UWB Devices Python API. It parses Nooploop LinkTrack UWB Protocols.

Nooploop Homepage: https://www.nooploop.com/

Supported Devices

Product	Supported?	Protocols
LinkTrack	NO	-
LinkTrack AOA	Partial	NLink_LinkTrack_AOA_Node_Frame0

Installation

System

Ubuntu20.04 (Ubuntu18.04, Windows Should also work fine.)

Prerequisites (If you want to build from source)

Setuptools,
Wheel

Install with one line.

(your terminal)$: pip install --upgrade pip setuptools wheel

Dependencies

pyserial >= 3.5 (Tested with 3.5. Lower version should works fine.)

Install

Build From Source

Download Source Code.
Change directory to source code root.
Running Command in your terminal

$: python setup.py sdist bdist_wheel

Change directory to (source code root)/dist. Run

(source code root)$: pip install ./Nooploop_UWB-0.0.1-py3-none-any.whl

You are all set.

Install From Release

Download Nooploop_UWB-0.0.1-py3-none-any.whl
Change directory to (Your downloads directory). Run

(Your downloads directory)$: pip install ./Nooploop_UWB-0.0.1-py3-none-any.whl

You are all set.

Run Example

Change directory to (source code root)/examples. Run

(source code root)$:python example.py

Outputs:

{
    "role": 2,
    "id": 0,
    "voltage": 4.364,
    "node_quantity": 1,
    "nodes": {
        "0": {
            "role": 1,
            "id": 0,
            "distance": 1.327,
            "angle": 57.66,
            "fp_rssi": -84.5,
            "rx_rssi": -80.0
        }
    }
}

Usage

from nooploop_uwb import aoa

if __name__ == '__main__':
    # Create AOA Instance with `config.json`
    UWB_AOA = aoa.AOA('config.json')

    # or create instance by passing port, baudrate parameters.
    # UWB_AOA = aoa.AOA(port='/dev/ttyUSB1', baudrate=9216000)

    try:
        while True:
            # __str__ method.
            print(UWB_AOA)

            # Get data in JSON format.
            json_data = UWB_AOA.get_data_json()

            # Get data in dictionary format.
            dic_data = UWB_AOA.get_data()

    except KeyboardInterrupt:
        print("Press Ctrl-C to terminate while statement")
        UWB_AOA.terminate()

# config.json
{
    "port": "/dev/ttyUSB1",
    "baudrate": 921600  
}

franva / nooploop_uwb