fpgadeveloper / fpga-drive-aximm-pcie

Example designs for FPGA Drive FMC

http://fpgadrive.com

fpgadeveloper/fpga-drive-aximm-pcie Issues

VCU118 dual. no enumeration over bars
Closed 4 months ago1
Boot stall on VCK190
Closed 7 months ago3
ZC706 and FPGA Drive SSD nvme0: Identify controller failed(-4)
Updated 2 years ago
Booting KCU105 HPC image without FPGA Drive
Closed 2 years ago2
some problems about this script of 18.2 version
Closed 4 years ago5
[ZCU106] Cannot detect the SSD
Closed 3 years ago3
[ZCU106] Boot stalls without proper connection with the FMC extension card
Closed 3 years ago1
Memory access failed
Closed 3 years ago1
The throughput of zc706 and single ssd
Closed 3 years ago1
The IP is set as GEN3 x4, but the connection is trained as GEN1 X2.
Closed 3 years ago1
when I try to configure the SSD through AXI BAR, I cannot write to it.
Closed 3 years ago1
VC707 and FPGA Drive SSD can't see console logs during the petalinux booting.
Updated 4 years ago10
The board_part definition was not found for em.avnet.com:picozed_7015_fmc2:part0:1.1.
Closed 4 years ago2
Need help with simulation of fpga-drive-aximm-pcie-2018.2_1 on vivado
Closed 4 years ago2
Multiple issues while building the SW project
Closed 5 years ago9
ZCU106 ELF downloading failed
Closed 4 years ago9
ZCU106 constraint file
Closed 5 years ago1
S_AXI_LITE's assigned address is out of range
Closed 5 years ago2
Running with KCU105
Closed 6 years ago8
Error running build-kcu105-lpc.bar
Closed 7 years ago
Can't get Linux to boot KCU105
Closed 7 years ago4