Draft
This project is design to be completed on Pluralsight. To find out more see here: https://www.pluralsight.com/product/projects.
Open a command prompt or powershell and run the following commands, replacing 'project-root' with the path to the root folder of the project.
> cd 'project-root'
> python -m venv venv
> venv\Scripts\activate.bat
> pip install -r requirements.txt
Open a terminal and run the following commands, replacing 'project-root' with the path to the root folder of the cloned Project repo.
$ cd 'project-root'
$ python3 -m venv venv
$ source venv/bin/activate
$ pip install -r requirements.txt
Note: If you've installed Python 3 using a method other than Homebrew, you might need to type python in the second command instead of python3.
Versions pip updates frequently, but versions greater than 10.x.x should work with this project.
In order to verify that everything is setup correctly, run the following command from the project root.
pytest
You should see that all the tests are failing. This is good! We’ll be fixing these tests once we jump into the build step. Every time you want to check your work locally you can type that command, and it will report the status of every task in the project.
You can preview your work by running flask run in the root of your fork. Then visit http://localhost:5000/admin in your browser. You will see a working preview after completing the first module.
Note: On Windows you may need to run python -m flask run instead of flask run.