Tool for cutting accurate SMT stencils on a Graphtec cutter (e.g. Silhouette Cameo or Portrait) from gerber files. Techniques include separately drawn line segments (no complex paths), antibacklash, drag-knife-angle "training", and multiple passes. This produces stencils usable down to approximately 0.5 mm pitch (QFP/QFN) and 0201 discrete components, or perhaps even slightly better; but it is slower than normal cutting.
A solderpaste gerber file, paste.gbr, and default settings:
gerber2graphtec paste.gbr >/dev/usb/lp0
A more elaborate command line with linear map (to correct spatial miscalibration) and multiple passes with different speeds and forces:
gerber2graphtec --offset 3,4 --matrix 1.001,0,-0.0005,0.9985 --speed 2,1 --force 5,25 paste.gbr >/dev/usb/lp0
You may want to have your CAM tool shrink the paste features by about 2 mils before exporting to gerber. The craft-cutter knife, when cutting thin mylar, seems to spread out the geometry by about this amount. I'd suggest using mylar with thickness between about 3 and 5 mils; the IPC-recommended thicknesses for fine-pitch stencils are approximately in this range. (Typical inexpensive laser-transparency sheets happen to be just right, being somewhere between 3.5 and 4.3 mils.) You may have to experiment with the cutting speeds and forces for best quality with your materials.
With Mac OS X or Windows, the file2graphtec script can take the place of /dev/usb/lp0. Write gerber2graphtec's output to a temporary file (gerber2graphtec ... >foo), then send it to the cutter (file2graphtec foo). I've tested file2graphtec on Mac OS X but not on Windows. For Mac OS X, install XCode and macports, then install the dependencies with
port install gerbv
port install pstoedit
port install libusb
These will take some time to build.
To run file2graphtec, you will also need the Python bindings for libusb-1.0. Download and install this package:
http://pypi.python.org/pypi/libusb1
with the usual python setup.py install
installation method (as the root user). If you don't need file2graphtec (perhaps you're on Linux and can just use the device node directly), this Python package isn't needed.
Ubuntu users may need to check their version of gerbv. Several users have reported that versions prior to 2.6.0 (such as 2.5.0) apparently have a bug related to omitting small apertures/pads. If your Linux distribution still has the old gerbv-2.5.0, please delete the package and instead build from source for the latest stable version:
http://gerbv.geda-project.org/
Fedora 17 has gerbv-2.6.0 in its supplied package list, so no issue there. For Fedora-like systems, "yum install gerbv pstoedit tkinter".
On some Linux distributions, permissions on /dev/usb/lp0 are restricted by default. To fix this, add yourself to the lp group and then log out and log back in:
sudo usermod -a --group lp your_userid
These pages have hints on usage (e.g. on Windows), materials, performance, calibration, etc:
A very good video walkthrough on cutting stencils using this program: https://www.youtube.com/watch?v=KqFHNe6nWpE
http://pmonta.com/blog/2012/12/25/smt-stencil-cutting/
http://dangerousprototypes.com/forum/viewtopic.php?f=68&t=5341
http://hackeda.com/blog/start-printing-pcb-stencils-for-about-200/
http://hackaday.com/2012/12/27/diy-smd-stencils-made-with-a-craft-cutter/
An optional GUI has been provided by jesuscf (see the dangerousprototypes.com thread linked above). It allows interactive selection of the input Gerber file, parameters, and cutting operations. To use it, run the file g2g_gui.py.
- gerbv (>= 2.6.0)
- pstoedit
- Ghostscript (dependency of pstoedit)
- Tkinter (when using g2g_gui)
This is an original tool by Peter Monta currently maintained under OhmBoard Design GP.
Thanks to the authors of robocut and graphtecprint for protocol documentation:
http://gitorious.org/robocut http://vidar.botfu.org/graphtecprint https://github.com/jnweiger/graphtecprint
Also thanks to this web page (Cathy Sexton) for inspiration:
http://www.idleloop.com/robotics/cutter/index.php
Her cutter seems to be quite a bit better than mine was out of the box. With Silhouette's default software my 0.5 mm pitch pads were distorted to the point of unusability.