foxt / Flash-CHIP

Ready to use Flash environment for the C.H.I.P Single Board Computer

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

Revive an outdated C.H.I.P. from factory OS to Debian Buster

This guide and scripts are based on the excelent work made by https://github.com/Thore-Krug/Flash-CHIP and the guide in https://gist.github.com/luzhuomi/526fbcc30f3522f09eacf20d0f776fa5

Instructions

Part 1: Stock image

  1. Remove the C.H.I.P. from its case (in case you have a Pocket C.H.I.P.).
  2. Connect the FEL and a GROUND pin of the C.H.I.P. (for example, with a paperclip).
  3. Connect the C.H.I.P. its micro USB port to a USB port of your Linux machine. Make sure that the port and cable allow for plenty of power. If you get a FEL error, it may be because the C.H.I.P. is running under-voltage.
  4. On the Linux machine:
    • run git clone https://github.com/asophila/Flash-CHIP.git to clone this repository
    • cd into the location where you stored this repository
    • run sudo chmod +x Flash.sh
    • run ./Flash.sh
    • Select the version you want to install
    • Wait until the installation finishes

Part 2: Get jessie to connect to the network

  1. Remove the FEL connection (the paperclip)
  2. Unplug 3 seconds
  3. Plug the C.H.I.P. again
  4. Connect to the chip using sudo screen /dev/ttyACM0
  5. Use user: chip and password: chip to connect
  6. run sudo nmtui to set-up a wifi connection to YOUR_SSID
  7. run sudo nmcli c to show your current connections
  8. run sudo nmcli c m <YOUR SSID> connection.autoconnect yes to set autoconnection to YOUR_SSID wifi in case of trouble
  9. use ip addr | grep "inet " | awk 'NR==2{print $2}' | cut -d/ -f1 to get your CHIP_IP. From your linux computer open other terminal and connect using ssh chip@CHIP_IP. You can close the terminal running screen.

Part 3: upgrade debian jessie to debian stretch

  1. run sudo su - to allow all the next changes as superuser
  2. run bash <(curl -s https://raw.githubusercontent.com/asophila/Flash-CHIP/master/CHIP-updater/jessie-to-stretch.sh) to update from Debian Jessie to Debian Stretch
  3. reboot C.H.I.P. into Debian Stretch

Part 4: upgrade debian stretch to debian buster

  1. From your linux computer open other terminal and connect using ssh chip@<CHIP IP>.
  2. run sudo su - to allow all the next changes as superuser
  3. run bash <(curl -s https://raw.githubusercontent.com/asophila/Flash-CHIP/master/CHIP-updater/stretch-to-buster.sh) to update from Debian Stretch to Debian Buster
  4. reboot C.H.I.P. into Debian Buster

About

Ready to use Flash environment for the C.H.I.P Single Board Computer


Languages

Language:Shell 100.0%