This is a version from https://github.com/Tsukihime/OpenExpertSDR with support for two audio cards. In linux is hard to work with two audio cards and in windows I not tested.
git clone https://github.com/florintanasa/OpenExpertSDR_2
To compile use:
QtCreator with qt5 or qt4 and for windows use mingw from http://www.mingw.org/ not from qt.
or from console after clone
cd OpenExpertSDR
qmake *.pro
make
or use cmake only for qt5
cd OpenExpertSDR
mkdir build
cd build
cmake ..
make
for libDttSP.so use this link https://github.com/wd8rde/libDttSP
for who have SDR from Genesis G59 or G11 https://github.com/wd8rde/libExtio_genesis
I added posibility to load at list virtual serial port at qextserial tnt* to be used with CAT
Module was take it from here https://github.com/freemed/tty0tty
To install:
git clone https://github.com/freemed/tty0tty
cd tty0tty/module
make
sudo cp tty0tty.ko /lib/modules/your kernel/kernel/drivers/tty/serial/
sudo depmod -a
sudo modprobe tty0tty
I create this file /lib/udev/rules.d/98-udev-tnt.rules with this rule
KERNEL=="tnt[0-9]*", GROUP="dialout"
Add your user name at dialout group
sudo gpasswd -a user_name dialout
if group dialout not exist create with
sudo groupadd dialout
Edit file /etc/modules and at the end add this line
tty0tty
Now modules is taken at every statup.
For test I used this CoolTerm http://freeware.the-meiers.org/