Ansible Network Collection for Dell EMC SmartFabric OS10

Collection contents

This collection includes Ansible modules, plugins and roles needed to provision and manage Dell EMC PowerSwitch platforms running Dell EMC SmartFabric OS10. Sample playbooks and documentation are also included to show how the collection can be used.

Collection core modules

Name	Description
os10_command	Run commands on devices running OS10
os10_config	Manage configuration on devices running OS10
os10_facts	Collect facts from devices running OS10

Collection roles

These roles facilitate the provisioning and administration of devices running SmartFabric OS10. There are over 30 roles available that provide a comprehensive coverage of most OS10 resources, including os10_interface, os10_acl, os10_bgp, and os10_vxlan. The documentation for each role is located at OS10 roles.

Sample use case playbooks

This collection includes these sample playbooks that illustrate end-to-end use cases.

CLOS fabric — Example playbook to build a Layer 3 leaf-spine fabric
VXLAN EVPN — Example playbook to build a scale-out leaf-spine topology using VxLAN, BGP EVPN, and symmetric-IRB

Installation

Use this command to install the latest version of the OS10 collection from Ansible Galaxy.

ansible-galaxy collection install dellemc.os10

To install a specific version, a version range identifier must be specified. For example, to install the most recent version that is greater than or equal to 1.0.0 and less than 2.0.0.

ansible-galaxy collection install 'dellemc.os10:>=1.0.0,<2.0.0'

Version compatibility

Ansible version 2.9 or later.
Python 3.5 or higher, or Python 2.7

Using in Ansible version 2.9

NOTE: This step is not required for Ansible version 2.10 or later.

To use this collection in Ansible version 2.9 it is required to set the below environment variable while running the playbook.

ANSIBLE_NETWORK_GROUP_MODULES=os10

It can be set permanently in ansible.cfg with variable network_group_modules under the defaults section.

ansible.cfg

[defaults]
network_group_modules=os10

NOTE: For Ansible versions lower than 2.9, use the legacy dellos10 modules and dellos roles.

Sample playbook

playbook.yaml

- hosts: os10_switches
  connection: network_cli
  collections:
    - dellemc.os10
  roles:
    - os10_vlan

host_vars/os10_sw1.yaml

hostname: os10_sw1
# Parameters for connection type network_cli
ansible_ssh_user: xxxx
ansible_ssh_pass: xxxx
ansible_network_os: dellemc.os10.os10

# Create vlan100 and delete vlan888
os10_vlan:
    vlan 100:
      description: "Blue"
      state: present
    vlan 888:
      state: absent

inventory.yaml

[os10_sw1]
os10_sw1 ansible_host=100.104.28.119

[os10_sw2]
os10_sw2 ansible_host=100.104.28.120

[os10_switches:children]
os10_sw1
os10_sw2

florath / dellemc.os10