firemodels / fds

Fire Dynamics Simulator

https://pages.nist.gov/fds-smv/

Repository from Github https://github.comfiremodels/fds

firemodels/fds Issues

Mesh out of alignment for meshes that is not adjacent to each other
Updated 3 months ago
Crash (segfault) on surface import from .bingeom file for a particular mesh configuration
Updated 3 months ago
Customize Colorbars
Updated 3 months ago2
Knudsen number off by a factor of 2
Updated 3 months ago
Symmetry breaks quickly in simple flow
Closed 3 months ago30
Juelich_SETCOM validation cases fail with seg fault
Closed 3 months ago4
DEVC "GAUGE HEAT FLUX GAS"
Updated 3 months ago9
Pressure_Solver/obst_activation cases do not remain isothermal.
Closed 3 months ago2
Verification cases fail in debug mode
Closed 3 months ago8
Problem with M-O verification cases
Closed 3 months ago2
Dynamic Smagorinsky model and varying Cs with multimesh
Closed 3 months ago3
Issues generating images with firebot
Closed 3 months ago5
Matlab warning in hot_rods post-processing
Closed 3 months ago1
Error in visualization of 'fog' from WATER VAPOR_COND species.
Closed 3 months ago5
Increasing Turbulence on Large scales
Closed 3 months ago1
Block burn away, but burning rate is zero
Closed 3 months ago9
Where to set HVAC_MASS_TRANSPORT_CELL_L?
Updated 3 months ago2
Particle memory requirements
Updated 3 months ago6
Unexpected zeroing out of Q_REAC
Closed 3 months ago11
How do I compile the Sundials on linux
Closed 3 months ago3
WARNING: Minimum density, 0.119 kg/m3, clipped in Mesh 3
Closed 3 months ago2
Mesh Misalignment when degrading resolution
Closed 4 months ago7
ULMAT/UGLMAT not working for indefinite matrices with latest oneAPI 2025 MKL
Closed 4 months ago5
Suggestion: Print ID of mesh and vent in "overlap" warning
Closed 4 months ago4
Error message when writing FDS file...
Closed 4 months ago1
Numerical Instability in HVAC simulation using pyrosim/FDS
Closed 4 months ago8
Smokeview 3D slice
Closed 4 months ago1
Storage counters for lagrangian particles with multiple meshes
Closed 4 months ago4
Storage counters for LAGRANGIAN_PARTICLE(1)
Closed 4 months ago4
Pressure fluctuation - HVAC
Closed 4 months ago23
Inconsistency in stoichiometric coefficients
Updated 4 months ago1
saving fire energy released in level set simulation
Updated 4 months ago9
Effect of temperature of gas release
Closed 4 months ago6
Initial output for object set to disappear at T_BEGIN still shows the presence of the object.
Closed 4 months ago1
Incorrect pre-exponential factor for 2nd reaction 'R2' in page 187 of UG (2 eq W-D mech)
Updated 4 months ago1
fractional effective dose (FED) shows different results in smoke view
Closed 4 months ago7
No success metric for verification case
Closed 4 months ago3
Can't run simulation on Ubuntu
Closed 4 months ago12
SPREAD_RATE issue with T_BEGIN
Closed 4 months ago5
GitHub Actions fails due to change in Intel compiler
Closed 4 months ago5
implementation of U0/V0/W0
Closed 4 months ago10
Particle Removal
Closed 4 months ago1
MPI failing with current source
Closed 4 months ago17
separate HRR from solid oxidation
Closed 4 months ago3
Camp Swift case crashing on gnu linux
Closed 4 months ago7
vent overlap warning messages
Closed 5 months ago4
AREA_SCALING in PYROLYSIS
Closed 5 months ago2
Electric furnace experiment validation through FDS?
Closed 5 months ago
Problem with a nozzle at the boundary using PERIODIC FLOW ONLY boundary conditions
Closed 5 months ago2
Error: MKL Library compile flag was not defined for ULMAT as pressure solver.
Closed 5 months ago4