Giters
fieldOfView
/
Cura-ZOffsetPlugin
A Cura plugin that adds a Z Offset setting
Geek Repo:
Geek Repo
Github PK Tool:
Github PK Tool
Stargazers:
47
Watchers:
5
Issues:
35
Forks:
9
fieldOfView/Cura-ZOffsetPlugin Issues
Z-Offset in Per Model Settings
Closed
7 months ago
Comments count
1
[Feature Request] Multiple Z-offsets in a grid across the bed to "flatten" the print area with linear extrapolation
Closed
7 months ago
Comments count
2
Not showing in 5.4
Closed
8 months ago
Comments count
3
z-offset setting not visible in 'per-object' settings
Closed
10 months ago
Comments count
1
Option to not shift coordinates.
Closed
10 months ago
Comments count
1
ZOffset option not available in per model settings
Closed
10 months ago
Comments count
1
[Feature request] Reset to original on ;TYPE:SKIN (bottom skin)
Updated
10 months ago
Comments count
1
Very hand plugin, didn't initially show up in 5.2.1 after update
Updated
a year ago
Comments count
1
Z offset under Materials Print Settings Tab?
Closed
2 years ago
Comments count
1
Z-Offset only for the 1st layer
Closed
2 years ago
Comments count
2
Z-Offset incrementing in some situations?
Closed
2 years ago
Comments count
4
Z-Offset not working in Cura 5 Beta
Closed
2 years ago
Comments count
1
Printer resets on first print
Closed
2 years ago
Comments count
1
Manual
Closed
2 years ago
Comments count
1
Z-Offset for Start G-Code possible?
Updated
2 years ago
Cannot see the plugin it the settings
Closed
3 years ago
Comments count
2
Offset Issue with Cura 4.7.1
Closed
3 years ago
Comments count
5
zoffset setting grey / inactive
Closed
4 years ago
Comments count
4
After installation on Cura 4.7 cura crashes continuously
Closed
4 years ago
Comments count
2
3.5.6 Problem
Closed
4 years ago
Comments count
3
Cura 4.5.0 will not save gcode when z offset used
Closed
4 years ago
Comments count
10
Crash cura on startup
Closed
4 years ago
Comments count
4
Z-offset amount does not affect Cura's default start code
Closed
4 years ago
Comments count
4
Non-zero value results in printhead starting ~75mm up the Z axis
Closed
5 years ago
Comments count
3
Doesn't seem to be enabled in Cura 4.4
Closed
5 years ago
Comments count
4
Not an Issue, But: Just to Clarify?
Closed
5 years ago
Comments count
1
Z Offset plugin in Cura
Closed
5 years ago
Comments count
1
Does this still work?
Closed
5 years ago
Comments count
2
does not work anymore on latest firmware (5.2) on um3
Closed
5 years ago
Comments count
4
Only offsets 1st layer, not others
Closed
6 years ago
Comments count
1
There should not be a minimum value
Closed
6 years ago
Comments count
4