fiberpunk1 / Beam-ESP32

Beam by Fiberpunk - ESP32

fiberpunk1/Beam-ESP32 Issues

Dead project??
Updated 8 months ago
Error reference to 'File' is ambiguous
Updated 9 months ago
Debug information is sent to the printer serial port.
Updated 10 months ago
Node confused by "G29 L0" Gcode command, thinks it means that the print is finished
Closed a year ago9
Problem with UI
Closed a year ago2
Pause, Cancel and Resume button freezes communication
Updated a year ago1
Filelist web interface doesn't update
Updated a year ago
Docker Image
Updated a year ago
Incorrect year & name for Prusa MK3s firmware (not 2023-02-02-2009-PRUSA-MK3S when following the guide links)
Closed a year ago1
Bed not heated up on Anycubic vyper when starting via fiberpunk beam
Updated a year ago3
Support for uploading files through API using filename instead of path
Closed a year ago1
Entry Point Not Found
Updated 2 years ago
Mac version
Updated 2 years ago
Prusa MK3s+: Node not recognizing a stopped / cancelled print and requires reboot
Updated 2 years ago
Status API not responding correctly
Updated 2 years ago1
Feature Request: Upload file to Node via Prusaclicer
Closed 2 years ago6
Unable to Mount with Printer Offline
Closed 2 years ago5
Display more helpful error messages
Closed 2 years ago1
No SD-Card works in the Node for MK3s - every time "Not Found SD Card"
Updated 2 years ago1
[Feature Request] alternative power supply (24v option)
Closed 2 years ago