faronov's repositories
AirQualitySensor
Simple Air Quality sensor based on nRF52840, Zigbee, AM2302/DHT22 and Senseair S8
EFEKTA-EINK213-TEMP-HUM-PRESS-SENSOR-NRF52840-V2
Micro weather station. Wireless temperature, humidity, pressure, weather forecast and light sensor. Designed on the nRF52840 wireless radio module. The temperature, humidity and pressure sensor BME280, SHT20, SHT21, SI7020, SI7021, HTU20D, HTU21D is used. Light sensor MAX44009. The device is powered by a CR2450 battery. Power consumption when transmitting data is 8mA, in sleep mode is 4.7uA.
EFEKTA_eON213z
My new zigbee project. Wireless temperature and humidity mini sensor with electronic ink display 2.13 inches, low power consumption, compact size, enclosure with magnets. The device use SHTC3 sensors, chip CC2530, battery CR2477.
efr32mg21_dev
efr32mg21
eON-AQSENS_213_V2_ED3-EFEKTALAB
Wireless, battery-operated Mini air quality and weather station. Air quality, temperature, humidity, pressure, weather forecast. Designed on the RF52810, nRF52811, nRF52832, nRF52833, nRF52840 wireless radio modules. The temperature, humidity and pressure sensor BME280, temperature and pressure sensor BMP280, temperature and humidity sensor SHTC3, light sensor MAX44009, air quality sensor SGP40 is used The device is powered by CR2477 battery. Consumption when transmitting data is 8mA, in sleep mode is 325uA-35uA (see datasheet SGP40).
eON-INDOOR_CLIMATE_SENSOR_290-EFEKTALAB
New arduino project. Wireless weather mini station with electronic ink display 2.9 inches (GDEH029A1 OR GDEM029T94), very low power consumption,compact size, housing with magnets. The device can use si7020 / 21, sht20 / 21, HTU20/21D or BME280 sensors. Use the MINEW MS50SFA RF module with nRF52832 chips, or the EBYTE E73 module with nRF52840 and nRF52833 chips.
eON-INDOOR_CLIMATE_SENSOR_EFEKTA_eON29wz
It's a fully assembled and programmed compact wireless devices, atmospheric pressure, temperature, humidity, weather forecaster, illumination, charts with 2.9" e-paper display, resolution of 296 x 128 pixels. The device has an industrial look, at least I wanted to achieve this. The sensor has good energy efficiency. Powered by CC2530 chip (Zigbee).
epd-driver-ic
Driver ICs for EPD
Growhouse
Through collaboration with Analog Devices, Silicon Labs, Osram, Amphenol and Arrow’s engineering capabilities, we have created the Growhouse Smart Horticulture soution with all sensing, power, signal conditioning, lighting control, and wireless communication challenges have been pre-solved, allowing for quicker time to market.
jn5169-monitor
Read flash when CRP_LEVEL=1
openthread
OpenThread released by Google is an open-source implementation of the Thread networking protocol
openwrt-8devices
OpenWRT for 8devices WiFi modules
Plant-Watering-Sensor-Zigbee
Plant Watering Sensor Project for Zigbee Network (in the beginning it was based on the Source Code of theDIYRUZ Flower Project - https://github.com/diyruz/flower).
Sungrow-SHx-Inverter-Modbus-Home-Assistant
Sungrow SH Integration for Home Assistant for SH3.6RS, SH4.6RS, SH5.0RS, SH5.0RT, SH6.0RS, SH8.0RT, SH6.0RT, SH10RT
supervised-installer
Installer for a generic Linux system