HOnnotate: A method for 3D Annotation of Hand and Object Poses

Shreyas Hampali, Mahdi Rad, Markus Oberweger, Vincent Lepetit, CVPR 2020

Project page

This repository contains code for annotating 3D poses of hand and object when captured with a single RGBD camera setup.

Citation

If this code base was helpful in your research work, please consider citing us:

@INPROCEEDINGS{hampali2020honnotate,
title={HOnnotate: A method for 3D Annotation of Hand and Object Poses},
author={Shreyas Hampali and Mahdi Rad and Markus Oberweger and Vincent Lepetit},
booktitle = {CVPR},
year = {2020}
}

Installation

This code has been tested with Tensorflow 1.12 and Python 3.5
Create a conda environment and install the following main packages.
Install DIRT differentiable renderer from here
Install pyRender from here (our code uses version 0.1.23)
Install chumpy from here
Install the following additional packages.

        pip install numpy matplotlib scikit-image transforms3d tqdm opencv-python cython open3d

Setup

HOnnotate_ROOT is the directory where you download this repo.

Clone the deeplab repository and checkout the commit on which our code is tested

            git clone https://github.com/tensorflow/models.git
            git checkout 834902277b8d9d38ef9982180aadcdaa0e5d24d3

Copy research/deeplab and research/slim folders to models folder in HOnnotate_ROOT repo
Download the checkpoint files (network weigts) from here and extract in HOnnotate_ROOT
Download the objects 3D corner files here and extract in HOnnotate_ROOT
Download the YCB object models by clicking on The YCB-Video 3D Models in [https://rse-lab.cs.washington.edu/projects/posecnn/]. Update the YCB_MODELS_DIR variable in HOdatasets/mypaths.py with the path where you unpacked the object models into (path to where models folder branches off).
Download and extract the test sequence from here and update HO3D_MULTI_CAMERA_DIR variable in HOdatasets/mypaths.py with its location. Note that the path should not contain the sequence name i.e., the path is until the test sequence folder.
Download Models&code from the MANO website. Assuming ${MANO_PATH} contains the path to where you unpacked the downloaded archive, use the provided script to setup the MANO folder as required.

        cd ./optimization
        python setup_mano.py ${MANO_PATH}
        cd ../

Finally, your folder structure should look like this:

            - checkpoints
                - CPM_Hand
                - Deeplab_seg
            - eval
            - HOdatasets
            - models
                - CPM
                - deeplab
                - slim
            - objCorners
                - 003_cracker_box
                - 004_sugar_box
                ....
            - onlineAug
            - optimization
            - utils

Data Capture

The codes in this repository allow annotation of hand-object 3D poses of sequences obtained from single RGBD camera setup.
A test sequence captured on Intel RealSense D415 camera can be downloaded from here
Note that as explained in Section (4.2) of paper, the grasp pose of the hand should vary marginally throughout the sequence when captured on single camera setup.
Any new data captured from other camera setup should follow the same folder structure as in the test sequence.
Folder structure:

        -test
            -rgb
                -0
                    -00001.png
                    -00002.png
                    .
                    .
            -depth
                -0
                        -00001.png
                        -00002.png
                        .
                        .
            -calibration
                -cam_0_depth_scale.txt
                -cam_0_instrinsics.txt
            -configs
                -configHandPose.json
                -configObjPose.json

cam_0_depth_scale.txt contains depth scale of the depth camera and cam_0_instrinsics.txt contains camera instrinsics. *.json in configs are used as inputs to the scripts (explained later). Folder name '0' in rgb and depth folder correspond to camera ID, which is always 0 in single camera setup.

Run (Single camera setup)

Please refer to Section 4.2 in the paper. Below stages for performing automatic hand-object pose annotation follows the same pipeline as in paper.

0. Keypoints and Segmentations

We use deeplab network for segmentation and Convolutional pose machine for hand keypoint detection. The networks are trained with HO3D dataset and the weights can be downloaded from here

0.1. Hand+Object segmentations

        python inference_seg.py --seq 'test'

The segmentations are saved in segmentation directory of the test sequence

0.2. Hand 2D keypoints

This requires the segmentation script to be run beforehand

        python inference_hand.py --seq 'test'

The 2D keypoints are saved in CPMHand directory of the test sequence

1. Hand and Object Pose Initializations

1.1. Object pose initialization

The object pose in all frames of the sequence is initialized by tracking. To reduce the effort of manual initialization, the object pose in the first frame can be simple upright position. Before tracking the object pose, the config file configObjPose.json in configs folder of thetest sequence should be updated.

obj: YCB name of the object used in the sequence
translationInit: Initialization of object translation in the first frame. Should be updated if the pose of the object is not upright in the first frame.
rotationInit: Initialization of object rotation (axis-angle representation) in the first frame. Should be updated if the pose of the object is not upright in the first frame.

The following script starts object tracking from the first frame of the sequence.

        cd ./optimization
        python objectTrackingSingleFrame.py --seq 'test' --doPyRender

Remove --doPyRender flag to run the script faster. It only helps with the visualization. The script creates dirt_obj_pose folder in the test sequence folder with the results of optimization for each frame and below visualization.

The above figure shows the input frame after object segmentation, object rendered in the initialization pose, depth map error and silhouette error.

1.2. Hand pose initialization

This script obtains initial 3D grasp pose of the hand relative to the object coordinate frame using the hand 2D keypoints detected earlier (step 0.2). Refer to Eq. (12) in paper for this optimization for more details.

        python handPoseMultiframeInit.py --seq 'test'

The optimization uses chumpy package and is hence slow. The results are stored in handInit folder of test sequence.

The 2D keypoints are lifted to 3D keypoints and the resulting mesh is shown in the above figure.

2. Grasp Pose Estimation

A more accurate grasp pose of the hand is obtained using the initialization in step 1.2. Refer to Eq. (13) in paper for more details. Modify the config file configHandPose.json in configs folder of test sequence as in step 1.1. Update betaFileName field in the json file to use different hand shape parameters or point to the correct beta files. Beta parameters of 10 different subjects used in the dataset generation can be downloaded from here

        python handPoseMultiframe.py --seq 'test' --numIter 200 --showFig --doPyRender

Remove --showFig and --doPyRender flags to run faster without visualization. The results of optimization and visualization (if enabled) will be dumped in dirt_grasp_pose folder of the test sequence.

The first figure above shows the pose of object and hand during optimization. First row is the input image, second row is the hand-object rendered with poses at current iteration, third and fourth row shows the depth and silhoutte erro. The second figure above is the grasp pose of the hand after optimization.

3. Object Pose Estimation

A more accurate object pose is obtained by tracking the object poses as explained in Section 4.2 of paper. The difference between this stage and Object pose initialization in step 1.1 is, the hand mesh rendered with the estimated grasp pose is also used in the optimization. Update the configHandObjPose.json file in configs folder of the test sequence as earlier in step 1.1.

       python handObjectTrackingSingleFrame.py --seq 'test' --showFig --doPyRender

The results are dumped in dirt_hand_obj_pose folder of test sequence.

4. Multi-frame Pose Refinement

This stage performs optimization over mutliple frames and over all the hand-object pose variables. Refer to Eq. (1) in paper. The optimization is done in batches.

        python handObjectRefinementMultiframe.py --seq 'test' --showFig --doPyRender --batchSize 20

The results are dumped in dirt_hand_obj_refine folder of test sequence.

Known issues

The segmentation network often under-segmentents the hand near the finger tips. This results in a small shift in the final annotated keypoints of the finger tips. In order to account for this, the segmentation maps are corrected after Step 3 using the estimated keypoints and depth map. The segmentation correction script will be updated soon.

Acknowledgements

We would like to thank the authors of Monocular total capture: Posing face, body, and hands in the wild for making the Convolutional pose machine code public
Thanks to the authors of End-to-end Recovery of Human Shape and Pose for making their tensorflow MANO code public
Thanks to Yana Hasson for proof reading the paper

f18298335152h / HOnnotate