Erik's starred repositories
canopen-stack
Free CANopen Stack for Embedded Systems
STM32H7-W25Q128-External-Loader
W25Q128 External Loader for STM32H7
STM32-W25Q-QSPI
STM32 Winbond W25Q memory Quad SPI Driver
stm32-mw-openbl
Provides the Open Bootloader library, part of the STM32Cube MCU Component "middleware", for all STM32xx series.
pcan_cantact
:robot: PCAN firmware for CANtact ( CANable ) or any other similar boards.
pcan_cantact
:robot: XCAN firmware for CANtact ( CANable ) or any other similar boards.
bms-to-inverter
Use, monitor and control any battery brand with any inverter! Application to read and monitor data from BMSes and write data to an inverter using any protocol (e.g. UART, RS485, ModBus or CAN)
tinypico-hardware
Hardware design files for TinyPICO and Shields
obsidian-boa
Compact ESP32-S2 development board.
CANopenEditor
CANopen Object Dictionary Editor
CANopenNode
CANopen protocol stack
dlan-greenphy-sdk
The devolo dLAN Green PHY module is ideal for installation in all IoT-devices. Includes QCA7000 chipset and LPC1758 host processor.
diyBMSv4ESP32
diyBMS v4 code for the ESP32 and new controller hardware
Solar2MQTT
ESP8266 based WiFi and MQTT interface for MPPT Inverters that use watchpower
secretsanta
Host secret santa without leaking your guests' informations 🎄
ESP_WiFiManager
This is an ESP32 / ESP8266 WiFi Connection Manager with fallback web configuration portal. Use this library for configuring ESP32 (including ESP32-S2 and ESP32-C3), ESP8266 modules' WiFi, etc. Credentials at runtime. You can also specify static DNS servers, personalized HostName, fixed or random AP WiFi channel. With examples supporting ArduinoJson
ESPAltherma
Monitor your Daikin Altherma / ROTEX heat pump with ESP32
P1P2MQTT
Monitor and control Daikin/Rotex (hybrid/Altherma) heat pumps via the 2-wire P1/P2 thermostat interface with an ATmega328P, ESP8266, and electronics. The P1P2Serial library and P1P2Monitor program perform low-level bus operation, the P1P2-bridge-esp8266 program interprets data from/to MQTT supporting Home Assistant MQTT discovery. P1P2Serial may also be used for other Japanese Home Bus System based standards: DIII-NET (F1/F2) bus, Mitsubishi M-Net bus, Toshiba TCC-Link, Hitachi H-link, Panasonic/Sanyo SIII-Net, Haier, York, and others.
esp32-lora-library
Low-level Lora (SX127_) library for the ESP-32 IDF