ericklein / air_quality

displays and logs local indoor and outdoor weather and air quality information

ericklein/air_quality Issues

Text wrapping for screen display
Closed 8 months ago1
why are new LC709203Fs not working with existing code?
Closed 9 months ago
does magtag have voltage monitor on gpi04?
Closed 9 months ago1
what epd pins are pre-defined in the magtag board definition
Closed 9 months ago1
batteryRead doesn't set hardwareData.battery to 0 if hardware not detected
Closed 9 months ago1
low power warning during initialization phase
Updated 9 months ago1
Add thermistor support to LC709203F code`
Updated 9 months ago
Disabling DEBUG should not require commenting code
Updated 9 months ago
Reported temp/humidity #s seem suspect
Closed 10 months ago1
5 bar WiFi display crosses UI border line
Closed 10 months ago1
Display charging icon when attached to USB cable
Updated 10 months ago1
move private elements of MQTT, influx data structure from config.h to secrets.h
Closed 10 months ago2
Log battery temperature on all AQ units
Updated a year ago
Display low power warning in battery gauge
Updated a year ago
Battery display shows board default voltage when no battery attached and USB power
Closed a year ago3
Display OWM PM25 value on screen
Closed a year ago1
#define support for non SCD40 hardware
Closed a year ago1
Use conditional defines in config.h for SCREEN variables
Closed a year ago2
ifndef SCREEN, code does not compile
Closed a year ago1
battery is lasting less than seven days vs. almost a month
Updated a year ago
rebuild readme.md
Updated a year ago1
deploy unit outside for seven days to explore CO2 reading accuracy
Updated a year ago
Handle error condition for RJ45 and retrieving RSSI value
Updated a year ago1
aq_network.httpGETRequest() error handling insufficient
Closed a year ago2
Add spark lines to display CO2 history
Closed a year ago2
Display sample interval so users know what delta values mean
Updated a year ago1
when environment sensor is restored, screen still says it is not working
Updated a year ago3
update time displayed is 1 hour off
Closed a year ago2
Move AQI rating from European to US standard
Updated a year ago2
Replace batteryVoltageAvailable with actual value test
Closed a year ago3
Do/should the screenHelperXXX functions all use the same yBottomMargin?
Closed a year ago3
Add initial XY coordinates to screen helper routines
Closed a year ago1
pm25 might have better network.begin()
Closed a year ago1
AQnetwork.begin() returns T/F even though result is stored in global
Closed a year ago1
Change WiFi reconnect time to <10 seconds
Closed a year ago1
const [datatype] vs. #define
Closed a year ago1
5x sample CO2
Closed 2 years ago1
Use IP address to generate geolocation
Updated 2 years ago
Implement partial epd refresh via alternate epd library
Updated 2 years ago1
OTA Firmware update support
Updated 2 years ago
WiFi Manager support
Updated 2 years ago
Move CO2 bands to config.h parameters
Closed 2 years ago1
Battery monitoring for non-LC709203
Closed 2 years ago1
Temp, humidity delta is reporting <1 changes as 1 in infoScreen
Updated 2 years ago1
Screen not updating for many hours at a time
Updated 2 years ago
Log RSSI to data sources
Closed 2 years ago2
Add a routine to clear nv storage
Closed 2 years ago1
internalTemp is never set to 10000 although code has checks for it
Closed 2 years ago1
SAMPLE_SIZE 1 breaks averaging logic
Closed 2 years ago5
co2 not publishing to MQTT
Closed 2 years ago1