erhan sakarya's repositories
b-parasite
🌱💧 An open source soil moisture sensor.
BlueRetroHW
Kicad for BlueRetro project
capacitive-soil-moisture-sensor
Compact and battery powered capacitive soil moisture sensor.
CatSniffer
CatSniffer is an original multiprotocol, and multiband board made for sniffing, communicating, and attacking IoT (Internet of Things) devices. It was designed as a highly portable USB stick that integrates the new chips TI CC1352, Semtech SX1262, and Microchip SAMD21E17.
CatWAN_USB_Stick
An Open Source USB Stick compatible with LoRa and LoRaWAN with Cortex M0+. To connect, review and analyze packages of LoRa®
EnvOpenPico
An open source RP2040 MCU Board Family
esp32-esp-idf-samples
ESP32 ESP-IDF Samples
ESP32_BLE_OTA_Arduino
OTA update on ESP32 via BLE
ESP32-bluetooth-STM32-programmer
ESP32 program for flashing STM32 microcontrollers wirelessly with bluetooth
ethersweep
Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.
Firmware-Over-The-Air
Firmware updates Over-The-Air (FOTA) for an STM32F103 microcontroller using an ESP8266 and Google Firebase. Key components include WiFi connectivity, Firebase authentication, and MQTT communication.
Gateway-Smartwatch
Everything you need to build my Gateway ESP32 smartwatch project!
nrf52-IR
Decoding and saving carrier modulated IR signals and sending modulated IR signals using NRF52 SoCs
PCB-Prototyping-Catalogue
There are now, a total of 62 hardware electronics on this catalogue for Smart Devices, A.I. enabled. Designed in Kicad, and ready to download, order fabrication online, or buy on Tindie ready to install & use.
PCB_Business_Card
Elegant PCB Business Card made with Inkscape, Kicad and Svg2Shenzen.
PCIexpress-KiCad
PCI express libraries and templates for KiCad
phone_rtty_interface
AFSK interface for Android smartphones and tablets.
posix_tz_db
Generates POSIX timezones strings
project-hydra-meshtastic-pcb
A minimalist 1W LoRA PCB design for Meshtastic-device firmware
RetroWiFiModem
An ESP8266 based RS232 <-> WiFi modem with Hayes AT style commands and LED indicators
Smart_Domotics
The Smart Domotics boards can control lights and sprinkles, monitor the energy of your home or your the health of your plants. 100% compatible with ESPHome and Home Assistant
Smart_Garden
The Smart Smart Garden provides an ESP32 based interface for controlling up to 4 relays. The output of the relays is a 24VAC or a selectable 5-24VDC power, mainly targeted to control sprinkles.
Smart_Lights
The Smart Lights is an ESP32 based board for controlling dimmeables 12V led strip.
Smart_Plant
The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the information on an ePaper display.
Smart_Powermeter
The Smart Powermeter works as a shield for the TTGO T-Display allowing the measurement and display of electric parameters, such as current.
sniffer
ESP32 Air Quality Sensor with PMSA003 + BME680 and 1.14" LCD
temperature-logger
Anotter USB temperature logger that can record up to four channels with thermocouple or NTCs connected via CDC directly or SCPI to USB.
Uhome-Systems
Config files for my GitHub profile.
Zephyr_LoRaWAN
An example LoRaWAN Application on the Zephyr RTOS