This is just a little template/starting project for this controller.
When compiled and sent to the device it will flash an LED on pin C12. (This pin is connected to an LED already on the Olimex dev board)
This project is starting off as essentially a copy of the project laid out in this guide with a few addittions/changes here and there, it will also be adapted in the future to better fit with my projects.
I have also included a flash.cfg file which will can be used to flash the output onto the microcontroller, it is currently designed for use with a Bus Blaster JTAG interface, though another can be used through changing a line.
To use it, you will need openocd:
sudo openocd -f flash.cfg
Please feel free to do with this stuff what you like, if it helps you at all please let me know :).