Cherry

Cherry is an OpenFlow controller written in Go that supports OpenFlow 1.0 and 1.3 protocols. This project is not designed for general purpose, and it instead focuses on SDN (Software-Defined Networking) for an IT service provider.

Features

Supports OpenFlow 1.0 and 1.3 protocols
Focuses on compatibility with commercial OpenFlow-enabled switches
Supports network topology that has loops in it
Provides several northbound applications: ProxyARP, L2Switch, Floating-IP, etc.
Provides simple plugin system for northbound applications
RESTful API to manage the controller itself

Supported OpenFlow Switches (Fully Tested)

Dell Force10 S4810
Dell Force10 S3048-ON
Dell Force10 S3148
Open vSwitch

Tested OpenFlow Switches

HP 2920G
Pica8 P-3295
Quanta T1048-LB9

Requirements

MySQL (or MariaDB) database server

Quick Start

You can install Cherry on Docker or natively from source based on your preference.

Installing on Docker

Install Docker if you don't have it on your system by following instruction: https://docs.docker.com/installation/
Clone Cherry:

$ git clone https://github.com/superkkt/cherry.git

Copy the template configuration:

$ sudo cp cherry/cherry.yaml /usr/local/etc

Edit the configuration file /usr/local/etc/cherry.yaml as you want.
Build Docker image as root:

# cd cherry; docker build -t cherry .

Run as root:

# docker run -d -p 6633:6633 -v /dev/log:/dev/log -v /your/config/cherry.yaml:/usr/local/etc/cherry.yaml cherry

The bind mount of /dev/log is to collect syslog messages from the container and then write to the host's syslog daemon.

That's it! Cherry will be started in L2 switch mode.

Installing from source

Install Go language if you don't have it on your system by following instruction: http://golang.org/doc/install
Clone and compile Cherry:

$ go get github.com/superkkt/cherry

Copy the compiled binary and template configuration:

$ sudo cp $GOPATH/bin/cherry /usr/local/bin

$ sudo cp $GOPATH/src/github.com/superkkt/cherry/cherry.yaml /usr/local/etc

Edit the configuration file /usr/local/etc/cherry.yaml as you want.
Run:

$ /usr/local/bin/cherry &

That's it! Cherry will be started in L2 switch mode.

Copyright and License

Copyright (C) 2015 Samjung Data Service, Inc. All rights reserved.
Kitae Kim <superkkt@sds.co.kr>

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

emdneto / cherry