GreeAir Binding

This binding allows you too add Gree Air Conditioners as things. Once added as a thing, the user can control the Air Conditioner, similarly to how the Air Conditioner is controlled using the remote control or smartphone app.

Note : The Gree Air Conditioner must already be setup on the wifi network and must have a fixed IP Address.

UPDATE : Added Fahrenheit Support

Supported Things

This binding supports one Thing type: greeair.

Discovery

Discovery is possible but as yet is not supported in this binding.

Binding Configuration

No binding configuration required.

Manual Thing Creation

Fans can be manually created in the PaperUI or HABmin, or by placing a .things file in the conf/things directory. See example below.

Thing Configuration

The Air Conditioners IP address and refresh rate (in seconds) and network broadcast address are set at time of discovery. However, in the event that any of this information changes, the Air Conditioners configuration must be updated.

Channels

The following channels are supported for fans:

Channel Name	Item Type	Description
power-channel	Switch	Power on/off the Air Conditioner
mode-channel	Number	Sets the operating mode of the Air Conditioner
	Mode: Auto: 0, Cool: 1, Dry: 2, Fan: 3, Heat: 4
	For more details see the Air Conditioner's operating
	manual.
turbo-channel	Switch	Set on/off the Air Conditioner's Turbo mode.
	For more details see the Air Conditioner's operating
	manual.
light-channel	Switch	Enable/disable the front display on the Air
	Conditioner if applicable to the Air Conditioner model
temp-channel	Number	Sets the desired room temperature
swingvertical-channel	Number	Sets the vertical swing action on the Air Conditioner
	Full Swing: 1, Up: 2, MidUp: 3, Mid: 4, Mid Down: 5,
	Down : 6
windspeed-channel	Number	Sets the fan speed on the Air conditioner
	Auto:0, Low:1, MidLow:2, Mid:3, MidHigh:4, High:5
	The number of speeds depends on the Air Conditioner
	model.
air-channel	Switch	Set on/off the Air Conditioner's Air function if
	applicable to the Air Conditioner model
dry-channel	Switch	Set on/off the Air Conditioner's Dry function if
	applicable to the Air Conditioner model
health-channel	Switch	Set on/off the Air Conditioner's Health function if
	applicable to the Air Conditioner model
pwrsav-channel	Switch	Set on/off the Air Conditioner's Power Saving function
	if applicable to the Air Conditioner model

Full Example

Things:

Thing greeair:greeairthing:b2d08bb1 [ ipAddress="192.168.12.62", refresh=2 ]

Items:

Switch AirconPower                  { channel="greeair:greeairthing:b2d08bb1:powerchannel" }
Number AirconMode                   { channel="greeair:greeairthing:b2d08bb1:modechannel" }
Switch AirconTurbo                  { channel="greeair:greeairthing:b2d08bb1:turbochannel" }
Switch AirconLight                  { channel="greeair:greeairthing:b2d08bb1:lightchannel" }
Number AirconTemp "Temperature [%.1f °C]" {channel="greeair:greeairthing:b2d08bb1:tempchannel" }
Number AirconTempSet                { channel="greeair:greeairthing:b2d08bb1:tempchannel" }
Number AirconSwingVertical          { channel="greeair:greeairthing:b2d08bb1:swingverticalchannel" }
Number AirconFanSpeed               { channel="greeair:greeairthing:b2d08bb1:windspeedchannel" }
Switch AirconAir                    { channel="greeair:greeairthing:b2d08bb1:airchannel" }
Switch AirconDry                    { channel="greeair:greeairthing:b2d08bb1:drychannel" }
Switch AirconHealth                 { channel="greeair:greeairthing:b2d08bb1:healthchannel" }
Switch AirconPowerSaving            { channel="greeair:greeairthing:b2d08bb1:pwrsavchannel" }

Sitemap:

This is an example of how to set up your sitemap.

Frame label="Controls"
{
   Switch item=AirconPower label="Power" icon=switch
   Switch item=AirconMode label="Mode" mappings=[0="Auto", 1="Cool", 2="Dry", 3="Fan", 4="Heat"]
   Setpoint item=AirconTemp label="Set temperature" icon=temperature minValue=16 maxValue=30 step=1
}
Frame label="Fan Speed"
{
   Switch item=AirconFanSpeed label="Fan Speed" mappings=[0="Auto", 1="Low", 2="Medium Low", 3="Medium", 4="Medium High", 5="High"] icon=fan
}
Frame label="Fan-Swing Direction"
{
   Switch item=AirconSwingVertical label="Direction" mappings=[0="Off", 1="Full", 2="Up", 3="Mid-up", 4="Mid", 5="Mid-low", 6="Down"] icon=flow
}
Frame label="Options"
{
   Switch item=AirconTurbo label="Turbo" icon=fan
   Switch item=AirconLight label="Light" icon=light
   Switch item=AirconAir label="Air" icon=flow
   Switch item=AirconDry label="Dry" icon=rain
   Switch item=AirconHealth label="Health" icon=smiley
   Switch item=AirconPowerSaving label="Power Saving" icon=poweroutlet
}

elpheria / openhab-greeair-binding