Component to integrate some ZTE routers as a device trackers in home assistant.
- Provides a device_tracker to monitor the connection status of devices in your Wifi and LAN ports.
- Exposes the status of the scanner in "sensor.zte_tracker".
- Exposes the service "zte_tracker.pause" to pause/resume the scanner because when the scanner is running the web-admin-console sessions are cancelled.
Name | Model |
---|---|
ZTE F6640 | F6640 |
ZTE H288A | H288A |
ZTE H169A | H169A |
This integration could work with more routers. Try one of the above and see if it work with yours.
To use this integration, place the following snippet in configuration.yaml.
# Setup the platform zte_tracker
zte_tracker:
host: 192.168.1.1
model: F6640
username: user
password: !secret zte_password
interval_seconds: 60
consider_home: 180
poll_time: 60
new_device_defaults:
track_new_devices: no
Change the following parameters to match your configuration:
host
: Your router's local IP address (Usually 192.168.1.1 or 192.168.0.1)
username
: Your router's login username (Usually admin)
password
: Your router's login password
model
: Your router's model. Chose one from the Model column of the table above
For more information about the device_tracker parameters visit the official Home Assistant Documentation
- Thanks to @gselivanof for H288A, H169A models.