README
The libopencm3 project aims to create an open-source firmware library for various ARM Cortex-M3 microcontrollers.
Currently (at least partly) supported microcontrollers:
- ST STM32F0xx/F1xx/F2xx/F30x/F37x/F4xx/L0xx/L1xx series
- Atmel SAM3A/3N/3S/3U/3X series
- NXP LPC1311/13/17/42/43
- Stellaris LM3S series (discontinued, without replacement)
- TI (Tiva) LM4F series (continuing as TM4F, pin and peripheral compatible)
- EFM32 Gecko series (only core support)
- Freescale Vybrid VF6xx
The library is written completely from scratch based on the vendor datasheets, programming manuals, and application notes. The code is meant to be used with a GCC toolchain for ARM (arm-elf or arm-none-eabi), flashing of the code to a microcontroller can be done using the OpenOCD ARM JTAG software.
Status and API
The libopencm3 project is currently work in progress. Not all subsystems of the microcontrollers are supported, yet.
IMPORTANT: The API of the library is NOT yet considered stable! Please do not rely on it, yet! Changes to function names, macro names etc. can happen at any time without prior notice!
TIP: Include this repository as a GIT submodule in your project. To make sure your users get the right version of the library to compile your project. For how that can be done refer to the libopencm3-examples repository.
Prerequisites
Building requires python. (Some code is generated) If your user application uses the (optional) dynamic linker script generator, you will (presently) need GNU awk. Please see libopencm3#732
For Ubuntu/Fedora:
- An arm-none-eabi/arm-elf toolchain.
For Windows:
Download and install:
- msys - http://sourceforge.net/projects/mingw/files/MSYS/Base/msys-core/msys-1.0.11/MSYS-1.0.11.exe
- Python - http://www.python.org/ftp/python/2.7/python-2.7.msi (any 2.7 release)
- arm-none-eabi/arm-elf toolchain (for example this one https://launchpad.net/gcc-arm-embedded)
Run msys shell and set the path without standard Windows paths, so Windows programs such as 'find' won't interfere:
export PATH="/c//Python27:/c/ARMToolchain/bin:/usr/local/bin:/usr/bin:/bin"
After that you can navigate to the folder where you've extracted libopencm3 and build it.
Toolchain
The most heavily tested toolchain is "gcc-arm-embedded" https://launchpad.net/gcc-arm-embedded
Other toolchains should work, but have not been nearly as well tested. Toolchains targeting linux, such as "gcc-arm-linux-gnu" or the like are not appropriate.
NOTE We recommend, that you use g-a-c version 2.8 2014q3 or newer to build all platforms covered by libopencm3 successfully.
Building
$ make
If your have an arm-elf toolchain (uncommon) you may want to override the toolchain prefix (arm-none-eabi is the default)
$ PREFIX=arm-elf make
For a more verbose build you can use
$ make V=1
Fine-tuning the build
The build may be fine-tuned with a limited number of parameters, by specifying them as environment variables, for example:
$ VARIABLE=value make
-
FP_FLAGS
- Control the floating-point ABIIf the Cortex-M core supports a hard float ABI, it will be compiled with best floating-point support by default. In cases where this is not desired, the behavior can be specified by setting
FP_FLAGS
.Currently, M4F cores default to
-mfloat-abi=hard -mfpu=fpv4-sp-d16
, M7 cores defaults to double precision-mfloat-abi=hard -mfpu=fpv5-d16
if available, and single precision-mfloat-abi=hard -mfpu=fpv5-sp-d16
otherwise. Other architectures use no FP flags, in otherwords, traditional softfp.You may find which FP_FLAGS you can use in particular architecture in readme.txt shipped with gcc-arm-embedded package.
Examples:
$ FP_FLAGS="-mfloat-abi=soft" make # No hardfloat $ FP_FLAGS="-mfloat-abi=hard -mfpu=magic" make # New FPU we don't know of
-
CFLAGS
- Add to or supersede compiler flagsIf the library needs to be compiled with additional flags, they can be passed to the build system via the environment variable
CFLAGS
. The contents ofCFLAGS
will be placed after all flags defined by the build system, giving the user a way to override any default if necessary.Examples:
$ CFLAGS="-fshort-wchar" make # compile lib with 2 byte wide wchar_t
Example projects
The libopencm3 community has written and is maintaining a huge collection of examples, displaying the capabilities and uses of the library. You can find all of them in the libopencm3-examples repository:
https://github.com/libopencm3/libopencm3-examples
Installation
Simply pass -I and -L flags to your own project. See the libopencm3-examples repository for an example of using this library as a git submodule, the most popular method of use.
It is strongly advised that you do not attempt to install this library to any
path inside your toolchain itself. While this means you don't have to include
any -I
or -L
flags in your projects, it is very easy to confuse a multilib
linker from picking the right versions of libraries. Common symptoms are
hardfaults caused by branches into arm code. You can use arm-none-eabi-objdump
to check for this in your final elf. You have been warned.
Coding style and development guidelines
See HACKING.
License
The libopencm3 code is released under the terms of the GNU Lesser General Public License (LGPL), version 3 or later.
See COPYING.GPL3 and COPYING.LGPL3 for details.
Community
Mailing lists
-
Developer mailing list (for patches and discussions): https://lists.sourceforge.net/lists/listinfo/libopencm3-devel
-
Commits mailing list (receives one mail per
git push
): https://lists.sourceforge.net/lists/listinfo/libopencm3-commits