ExpressVPN

Container-based on polkaned/expressvpn version. This is my attempt mostly to learn more about docker.

PROTOCOL AND CIPHER

You can change it by env variables protocol and cipher.

Available protocols:

lightway_tcp
lightway_udp - default value
tcp
udp
auto

Cipher available only with lightway:

aes
chacha20 - default value
auto

NETWORK_LOCK

Currently, network_lock is turned on by default but in case of any issues you can turn it off by setting env variable NETWORK to off. In most cases when network_lock cannot be used it is caused by old kernel version. Apparently, the minimum kernel version where network_lock is supported is 4.9.

A script is included that checks if the host's kernel version meets minimum requirements to allow network_lock. If not and the user sets or leaves the default setting network_lock to on, then network_lock will be disabled to allow expressvpn to run.

WHITELIST_DNS

New env is available. It can be used like in the examples below and it is a comma seperated list of dns servers you wish to use and whitelist via iptables. Leave empty for default behavior. Added by phynias, thank you!

HEALTHCHECK

Healthcheck is performed once every 2min. You can also add --env=DDSN=domain or --env=IP=yourIP to docker run command or in the environment section of compose in order to perform healthcheck which will be checking if data from env variable DDNS or IP is different than ExpressVPN's IP. If you won't set any of them, by default healthcheck will return status healthy. Also, there is a possibility to add --env=BEAERER=access_token from ipinfo.io if you have an account there (free plan gives you 50k requests per month).

Additionally, healthchecks.io support has been added and you can add the id of the healthchecks link to the HEALTHCHECK variable in docker configs.

Build

AMD64 docker buildx build --build-arg NUM=EXPRESSVPN_VERSION --build-arg PLATFORM=amd64 --platform linux/amd64 -t REPOSITORY/APP:VERSION .

Raspberry Pi docker buildx build --build-arg NUM=EXPRESSVPN_VERSION --build-arg PLATFORM=armhf --platform linux/arm/v7 -t REPOSITORY/APP:VERSION-armhf .

Download

docker pull misioslav/expressvpn

Start the container

    docker run \
    --env=WHITELIST_DNS=192.168.1.1,1.1.1.1,8.8.8.8 \
    --env=CODE=code \
    --env=SERVER=smart \
    --cap-add=NET_ADMIN \
    --device=/dev/net/tun \
    --privileged \
    --detach=true \
    --tty=true \
    --name=expressvpn \
    --publish 80:80 \
    --env=DDNS=domain \ #optional
    --env=IP=yourIp \ #optional
    --env=BEARER=ipInfoAccessToken \ #optional
    --env=NETWORK=on/off \ #optional set to on by default
    --env=PROTOCOL=lightway_udp \ #optional set default to lightway_udp see protocol and cipher section for more information
    --env=CIPHER=chacha20 \ #optional set default to chacha20 see protocol and cipher section for more information
    misioslav/expressvpn \
    /bin/bash

Another container that will use ExpressVPN network:

    docker run \
    --name=example \
    --net=container:expressvpn \
    maintainer/example:version

Docker Compose

  example:
    image: maintainer/example:version
	container_name: example
	network_mode: service:expressvpn
	depends_on:
	  - expressvpn

  expressvpn:
    image: misioslav/expressvpn:latest
    container_name: expressvpn
    restart: unless-stopped
    ports: # ports from which container that uses expressvpn connection will be available in local network
      - 80:80 # example
    environment:
      - WHITELIST_DNS=192.168.1.1,1.1.1.1,8.8.8.8  # Comma seperated list of dns servers you wish to use and whitelist via iptables
      - CODE=code # Activation Code from ExpressVPN https://www.expressvpn.com/support/troubleshooting/find-activation-code/
      - SERVER=smart # By default container will connect to smart location, list of available locations you can find below
      - DDNS=yourDdnsDomain # optional
      - IP=yourStaticIp # optional - won't work if DDNS is setup
      - BEAERER=ipInfoAccessToken # optional can be taken from ipinfo.io
      - HEALTHCHECK=healthchecks.ioId # optional can be taken from healthchecks.io
      - NETWORK=off/on #optional and set to on by default
      - PROTOCOL=lightway_udp \ #optional set default to lightway_udp see protocol and cipher section for more information
      - CIPHER=chacha20 \ #optional set default to chacha20 see protocol and cipher section for more information
    cap_add:
      - NET_ADMIN
    devices:
      - /dev/net/tun
    stdin_open: true
    tty: true
    command: /bin/bash
    privileged: true

SERVERS AVAILABLE

You can choose to which location ExpressVPN should connect to by setting up SERVER=ALIAS, SERVER=COUNTRY, SERVER=LOCATION or SERVER=SMART

You can check available locations from inside the container by running expressvpn list all command.

ediTv2 / expressvpn