eden13378 / pcileech-wifi

pcileech-fpga with wireless card emulation

PCILeech FPGA Summary:

PCILeech FPGA contains software and HDL code for FPGA based devices that may be used together with the PCILeech Direct Memory Access (DMA) Attack Toolkit and MemProcFS - The Memory Process File System. Using FPGA based devices have many advantages over using the USB3380 hardware that have traditionally been supported by PCILeech. FPGA based hardware provides full access to 64-bit memory space without having to rely on a kernel module running on the target system. FPGA based devices are also more stable compared to the USB3380. FPGA based devices may also send raw PCIe Transaction Layer Packets TLPs - allowing for more specialized research.

Supported Devices:

PCILeech currently supports multiple FPGA based devices with most recent firmware versions - please see the table below:

Device	Connection	Transfer Speed	Version	FPGA	PCIe Version	Project Sponsor
Screamer PCIe Squirrel	USB-C	190 MB/s	4.14	XC7A35T-484	PCIe gen2 x1	💖
ZDMA	Thunderbolt	800 MB/s	4.14	XC7A100T-484	PCIe gen2 x4	💖
LeetDMA	USB-C	190 MB/s	4.14	XC7A35T-484	PCIe gen2 x1	💖
Enigma X1	USB-C	200 MB/s	4.14	XC7A75T-484	PCIe gen2 x1	💖
PCIeScreamerR04	USB-C	190 MB/s	4.14	XC7A35T-325	PCIe gen2 x4*	💖
ScreamerM2	USB3/USB-C	190 MB/s	4.14	XC7A35T-325	PCIe gen2 x4*	💖
AC701/FT601	USB3	190 MB/s	4.14	XC7A200T-676	PCIe gen2 x4

*) PCILeech FPGA uses PCIe x1 even if more PCIe lanes are available hardware-wise. This is sufficient to deliver neccessary performance.

PCILeech also supports multiple FPGA based devices that may not have the most recent firmware available for download, but will still work with some limitations:

Legacy Device	Connection	Transfer Speed	Version	PCIe Version
PCIeScreamer	USB3	100 MB/s	4.9	PCIe gen2 x1
SP605/FT601	USB3	75 MB/s	2.2	PCIe gen1 x1
Acorn/FT2232H	USB2	25 MB/s	4.9	PCIe gen2 x4*
NeTV2	UDP/IP	7 MB/s	4.12	PCIe gen2 x4*

Please select the FPGA setup that best suits your needs from the above list. If performance and value for money is key the Screamer PCIe Squirrel is currently recommended. If performance is key alone ZDMA is a good pick.

Please check out the individual FPGA projects in the table above for more information about the purchase, usage, building and flashing of the devices. Each device have different advantages and disadvantages.

The images below depicts:

• Top row: ScreamerM2 and Screamer PCIe Squirrel.
• Middle row: ZDMA, Enigma X1 and LeetDMA.
• Bottom row: NeTV2, SP605 and AC701.

Support PCILeech/MemProcFS development:

PCILeech and MemProcFS are hobby projects of mine. I put a lot of time and energy into my projects. The time being most of my spare time. If you think PCILeech and/or MemProcFS are awesome tools and/or if you had a use for them it's now possible to contribute.

• Github Sponsors: https://github.com/sponsors/ufrisk

To all my sponsors, Thank You 💖