ed-xmos / vocalfusion-rpi-setup

xCORE VocalFusion Raspberry Pi Setup

This repository provides a simple-to-use automated script to configure the Raspberry Pi to use xCORE VocalFusion for audio.

Note: This repository is designed for use within the following xCORE VocalFusion repositories:

• xCORE VocalFusion Stereo 4-Mic Kit for AVS: https://github.com/xmos/vocalfusion-stereo-avs-setup
• xCORE VocalFusion 4-Mic Kit for AVS: https://github.com/xmos/vocalfusion-avs-setup

Setup

1. Install Raspbian Stretch on the Raspberry Pi.

2. Ensure running kernel version matches headers kernel headers package. A typical system requires the following --reinstall command:

   sudo apt-get install --reinstall raspberrypi-bootloader raspberrypi-kernel

   followed by a reboot.

3. Clone the Github repository https://github.com/xmos/vocalfusion-rpi-setup:

   git clone https://github.com/xmos/vocalfusion-rpi-setup

4. For VocalFusion devices, run the installation script as follows:

   ./setup.sh vocalfusion

   For VocalFusion Stereo devices, run the installation script as follows:

   ./setup.sh

   For XVF3510 devices, run the installation script as follows:

   ./setup.sh xvf3510

   Wait for the script to complete the installation. This can take several minutes.

5. Reboot the Raspberry Pi.