This repository is deprecated. This functionality has now been added to Home Assistant 2022.04. Thanks raman325! Link to pull request.
Based on home assistant core timer from version 2021.3.2.
NOTE: This version is has not been tested on versions prior to 2021.3.2
Allows for restoring timer after restart. Also compatible with timers > 24 hours.
Create a directory in your Home Assistant home directory called custom_components. This is the same directory that your configuration.yaml file lives. Copy the directory timer from this repository (/custom_components/timer) to your custom_components directory. Home Assistant will now use this code to setup and use your timers.
By default, the timer will be restored at HA boot. If the time has passed for when HA should have fired the finished event, then the finished event for the timer will not be fired. There is an option of adding a grace period to allow this event to fire.
See Example below.
Basic configuration in YAML is the same as before. Adding timers from the UI does not support custom configuration parameters (as far as I can tell, do inform me if you find otherwise). To load the defaults, add the following to your configuration.yaml file:
# Example configuration.yaml entry
timer:
laundry:
With this configuration, a timer will be added with a 0 duration and it will be restored on reboot with the last set duration.
To revert the timer to the previous functionality, use the following configuration:
# Example configuration.yaml entry
timer:
laundry:
restore: false
To allow a timer to fire a finished event when the duration time has already passed, add the following to your configuration.yaml file:
# Example configuration.yaml entry
timer:
laundry:
restore_grace_period: '00:15:00'
This sets the restore_grace_period to 15 minutes. This means that if HA goes down at 1:00 p.m. and the timer should have finished at 1:01 p.m., HA has until 1:16 p.m. to start up and fire the finished event. If HA doesn't come back online until 1:17 p.m., then it will not fire the finished event and your associated automation will not be triggered.
Say you have the following timer. When the timer is finished, an automation is triggered.
# Example configuration.yaml entry
timer:
turn_off_patio_light:
duration: '01:00:00'
restore: true
restore_grace_period: '00:15:00'
# Example automation.yaml entry
- alias: Timer for patio light finished
trigger:
- platform: event
event_type: timer.finished
event_data:
entity_id: timer.turn_off_patio_light
action:
- service: switch.turn_off
entity_id: switch.patio_light
Scenario 1:
The timer is started with a duration of 1 hour. After 30 minutes have elapsed, Home Assistant is restarted. Since it only took a few minutes for Home Assistant to restart, your timer continues as expected and there is no difference than had you not restarted Home Assistant.
Scenario 2:
The timer is started with a duration of 1 hour. After 30 minutes have elapsed, there is a power outage and Home Assistant is off for 31 minutes. When Home Assistant comes online, it sees that the timer should have finished 1 minute prior to it coming online. Since the restore_grace_period is set to 15 minutes and only 1 minute has passed since the timer should have finished, Home Assistant will fire the event timer.finished and the automation will be triggered. The timer will then return to its idle state.
Scenario 3:
The timer is started with a duration of 1 hour. After 50 minutes have elapsed, there is a power outage and Home Assistant is off for 30 minutes. When Home Assistant comes online, it sees that the timer should have finished 20 minutes prior to it coming online. Since the restore_grace_period is set to 15 minutes and 20 minutes have passed since the timer should have finished, Home Assistant not fire the event and the automation will not be triggered. The timer will then return to its idle state.