ESP-IDF Project for Wi-Fi, Ethernet, and 4G/LTE Network Router
- Tested using ESP-IDF framework version 4.4.4
Note: 4G LTE network routing is still work-in-progress.
| PCBCrew Easymeal IoT | PCBCrew BLDGOT kWh | ESP32-Ethernet-Kit |
|---|---|---|
 |
 |
 |
| ESP32-S3 / W5500 / mini-PCIe | ESP32-S3 / Wiznet W5500 | ESP32-WROVER / IP101 |
idf.py menuconfig
In addition to the common configurations for Ethernet, you might also need to update the default value of following configurations:
In the Example Configuration menu:
- Set the SSID and password for Wi-Fi ap interface under
Wi-Fi SSIDandWi-Fi Password. - Set the maximum connection number under
Maximum STA connections.
Build the web frontend in the webapp/ folder.
For more details, read this blog post: "Creating A Svelte Web Application For ESP32"
Build the project and flash it to the board, then run monitor tool to view serial output:
idf.py -p PORT build flash monitor