Forklift: lifting Foreman into your environment

Forklift provides tools to create Foreman/Katello environments for development, testing and production configurations. Whether you are a developer wanting an environment to write code, or a user wanting to spin up the latest production environment for deployment or evaluation Forklift has you covered.

Using Forklift

Requirements

Vagrant - 1.8+ - Both the VirtualBox and Libvirt providers are tested
Ansible - 2.1+
Vagrant Libvirt provider plugin (if using Libvirt)

See Installing Vagrant for installation instructions.

Quickstart

This will walk through the simplest path of spinning up a production test environment of a bleeding edge nightly installation assuming Vagrant and Libvirt are installed and configured.

git clone https://github.com/theforeman/forklift.git
cd forklift
vagrant up centos7-foreman-nightly

The same can be quickly done for a development environment where GITHUB_NICK is your GitHub username:

git clone https://github.com/theforeman/forklift.git
cd forklift
cp boxes.yaml.example boxes.yaml
sed -i "s/<REPLACE ME>/GITHUB_NICK/g" boxes.yaml
vagrant up centos7-devel

Poor man's DNS a.k.a /etc/hosts

For the multi-host setup, one of the easiest way of making the name resolution working with vagrant is using vagrant-hostmanager. Forklift supports this plugin by default. The only thing on needs to do is install the vagrant-hostmanager plugin:

vagrant plugin install vagrant-hostmanager

By default, the boxes are set with example.com domain.

Adding Custom Boxes

Sometimes you want to spin up the same box type (e.g. centos7-devel) from within the forklift directory. While this can be added to the Vagrantfile directly, updates to the forklift repository could wipe out your local changes. To help with this, you can define a custom box re-using the configuration within the Vagrantfile. To do so, create a boxes.yaml file. For example, to create a custom box on CentOS 7 with nightly and run the installers reset command:

my-nightly-koji:
  box: centos7
  ansible:
    playbook: playbooks/katello.yml
    variables:
      katello_repositories_use_koji: True
    verbose: vvv

Options:

box -- the ':name' one of the defined boxes in the Vagrantfile
bridged -- deploy on Libvirt with a bridged networking configuration, value
           of this parameter should be the interface of the host (e.g. em1)
memory -- set the amount of memory (in megabytes) this box will consume
cpus -- set the number of cpus this box will use
hostname -- hostname to set on the box
networks -- custom networks to use in addition to the management network
disk_size -- specify the size (in gigabytes) of the box's virtual disk. This
             only sets the virtual disk size, so you will still need to
             resize partitions and filesystems manually.
ansible -- updates the Ansible provisioner configuration including the
           playbook to be ran or any variables to set
libvirt_options -- sets Libvirt specific options
virtualbox_options -- sets VirtualBox specific options
rackspace_options -- sets Rackspace specific options
domain -- forklift uses short name of your host + 'example.com' as domain name for your boxes. You can use this option to override it.
sshfs -- if you have vagrant-sshfs plugin, you can use sshfs to share folders between your host and guest. See an example below for details.

Entirely new boxes can be created that do not orginate from a box defined within the Vagrantfile. For example, if you had access to a RHEL Vagrant box:

rhel7:
  box_name: rhel7
  shell: 'echo TEST'
  pty: true
  libvirt: http://example.org/vagrant/rhel-7.box

Example with custom networking, static IP on custom libvirt network:

static:
  box: centos7
  hostname: mystatic.box.com
  networks:
    - type: 'private_network'
      options:
        ip: 192.168.150.3
        libvirt__network_name: lab-private
        libvirt__iface_name: vnet2

Example with custom libvirt management network:

static:
  box: centos7
  hostname: mystatic.box.com
  libvirt_options:
    management_network_address: 172.23.99.0/24

Using SSHFS to share folders

You will need to install vagrant-sshfs plugin. Make sure your host actually has sshfs installed. Example with sshfs mounting folder from guest to host:

with-sshfs:
  box: centos7
  sshfs:
    host_path: '/some/host/path'
    guest_path: '/some/guest/path'
    reverse: True

If you want to mount in the opposite direction, just change reverse to False or remove it entirely.

Customize Deployment Settings

Some settings can be customized for the entirety of the deployment, they are:

memory: Memory to give boxes by default unless specified by a box
cpus: Number of CPUs to give boxes by default unless specified by a box
scale_memory: Factor to multiply memory of boxes that specify an own value
scale_cpus: Factor to multiply CPUs of boxes that specify an own value
sync_type: type of sync to use for transfer to the Vagrant box
mount_options: options for the vagrant-cachier plugin
domain: domain for your hosts, you can override this per-box by configuring your box with a domain directly

To customize any of these, copy settings.yaml.example to settings.yaml and add, remove or update the ones you wish to change'

Post Install Playbooks

Boxes can be further customized by declaring Ansible playbooks to be run during provisioning. One or more playbooks can be specified and will be executed sequentially. An ignored directory can be used to put playbooks into 'user_playbooks' without worrying about adding them during a git commit.

Ansible roles may also be installed directly using the ansible-galaxy command. These roles will be installed at playbooks/galaxy_roles and will be ignored by git. You may also specify roles in a requirements.yml, which you can use to install all desired roles with ansible-galaxy install -r requirements.yml

ansible:
  box: centos7-katello-nightly
  ansible:
    playbook:
      - 'user_playbooks/vim.yml'
      - 'user_playbooks/zsh.yml'

dschlenk / forklift