dkorunic / rpi-home-sensors

Raspberry Pi temperature, humidity and pressure graphing and storing

README

This is a Raspberry Pi temperature graphing PoC through Plotly (usually up to 200 points drawn) and persistant storage through Google Docs (Spreadsheet).

Plots CPU temperature (directly from RPI), environment temperature (BMP085), environment barometric pressure (BMP085), environment humidity (DHT22). and outdoor temperature (Weather Underground). It runs as a Unix daemon and preferably runs infinitely long.

If there is a LED available, it will pulse it in the background to indicate its running status.

Snapshot

Hardware requirements

• Raspberry Pi model A or B: http://shop.pimoroni.com/
• dupont cables or cobbler with breadboard (GPIO and I2C): http://www.smart-elex.co.uk/RaspberryPi/RASPBERRY-Pi-GPIO-ACCESSORIES/RPI-Electronics-kit1
• BMP085, BMP180, BMP183: https://www.adafruit.com/products/1900
• DHT11, DHT22 or DHT2302: https://www.adafruit.com/products/385
• LED
• 10kOhm and 330Ohm resistors (for DHT and LED)

Software Requirements

• Weather Underground developer account (free!): http://www.wunderground.com/weather/api
• Plotly account (free!): http://plot.ly
• Google Docs account (optional)
• WiringPI library: git://git.drogon.net/wiringPi
• bcm2835 library: http://www.airspayce.com/mikem/bcm2835/
• Adafruit BMP085 I2C library: included!
• Adafruit DHT GPIO library: https://github.com/adafruit/Adafruit_Python_DHT
• Plotly library: pip install plotly
• daemon library: pip install daemon
• gspread library: pip install gspread

Important notes

• Raspberry PI model A users need to edit Adafruit_I2C.py and do the following change:

    self.bus = smbus.SMBus(0);

• You can store Weather Underground configuration in /root/.weather_underground.rc:

    {"wu_city": "Zagreb", "wu_state": "Croatia", "wu_key": "XXXX"}

• Plotly configuration needs to be stored in /root/.plotly/.credentials

• You can store Google Docs configuration in /root/.google_docs.rc:

    {"gdocs_email": "[e-mail]", "gdocs_password": "secret password", "gdocs_sheet": "somesheet"}

Monitoring

Integration with Supervisor http://supervisord.org/ process control system is rather trivial. What is needed is a corresponding daemon configuration in /etc/supervisor/conf.d/rpi-plot.conf if the code has been placed at /home/pi/work/rpi-home-sensors:

    [program:rpi-plot]
    command=/home/pi/work/rpi-home-sensors/rpi-plot.py nodaemon
    stopsignal=INT
    autostart=true
    autorestart=true
    redirect_stderr=true
    stdout_logfile=/var/log/rpi-plot.log
    environment=HOME="/root"

Then the simple sequence of the following commands is enough to kickstart the process:

    supervisorctl update
    supervisorctl status

Copyright

Copyright (C) 2014 Dinko Korunic [e-mail]