djvergad / dash

An MPEG/DASH client-server module for simulating rate adaptation mechanisms over HTTP/TCP.

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

dash

An MPEG/DASH client-server ns3 module for simulating rate adaptation algorithms over HTTP/TCP.

This module was built for generating the simulation results in the following papers:

The DASH rate adaptation algorithms that are implemented are the following:

  • FDASH, This is the algorithms that is proposed in the above papers
  • AAASH, presented in: K. Miller, E. Quacchio, G. Gennari, and A. Wolisz, “Adaptation algorithm for adaptive streaming over HTTP,” in Proc. 19th Int. IEEE PV Workshop, 2012, pp. 173–178.
  • OSMF, presented in: R. K. P. Mok, X. Luo, E. W. W. Chan, and R. K. C. Chang, “QDASH: A QoE-aware DASH system,” in Proc. 3rd MMSys Conf., New York, NY, USA, 2012, pp. 11–22.
  • SVAA, presented in: G. Tian and Y. Liu, “Towards agile and smooth video adaptation in dynamic HTTP streaming,” in Proc. 8th Int. CoNEXT, New York, NY, USA, 2012, pp. 109–120. [Online].
  • RAAHS, presented in: C. Liu, I. Bouazizi, and M. Gabbouj, “Rate adaptation for adaptive HTTP streaming,” in Proc. 2nd Annu. ACM Conf. MMSys, New York, NY, USA, 2011, pp. 169–174. [Online].
  • SFTM, presented in: C. Liu, I. Bouazizi, M. M. Hannuksela, and M. Gabbouj, “Rate adaptation for dynamic adaptive streaming over HTTP in content distribution network,” Signal Process., Image Commun., vol. 27, no. 4, pp. 288–311, Apr. 2012.

Installation instructions

  1. Install ns3 on you system, using the instructions like from here: https://www.nsnam.org/wiki/Installation#Installation.

  2. Download the module into the contrib directory, with the following commands:

    cd ns-3-dev/
    cd contrib/
    git clone https://github.com/djvergad/dash.git

    A new directory named dash should be created in the src directory

  3. Re-configure ns3 and enable examples. From the ns-3-dev directory, type:

    For ns3 version 3.36 and above type

    ./ns3 configure --enable-examples

    For versions 3.35 and below type:

    ./waf configure --enable-examples
  4. Now the setup is complete. Validate by running an example:

    For ns3 version 3.36 and above type

    ./ns3 run 'dash-example --users=3 --algorithms=ns3::FdashClient --linkRate=1000Kbps --bufferSpace=10000000'

    For versions 3.35 and below type:

    ./waf --run 'contrib/dash/examples/dash-example --users=3 --algorithms="ns3::FdashClient" --linkRate=1000Kbps --bufferSpace=10000000'

    There should be output similar to the following:

    0.829568 Node: 0 newBitRate: 89000 oldBitRate: 45000 estBitRate: 205177 interTime: 0 T: 1.4284 dT: 0 del: +0.0ns
    0.84288 Node: 1 newBitRate: 89000 oldBitRate: 45000 estBitRate: 197645 interTime: 0 T: 1.42024 dT: 0 del: +0.0ns
    0.849848 Node: 2 newBitRate: 89000 oldBitRate: 45000 estBitRate: 185404 interTime: 0 T: 1.41842 dT: 0 del: +0.0ns
    1.40569 Node: 0 newBitRate: 131000 oldBitRate: 89000 estBitRate: 276525 interTime: 0 T: 2.85228 dT: 1.42388 del: +0.0ns
    1.45575 Node: 1 newBitRate: 131000 oldBitRate: 89000 estBitRate: 261727 interTime: 0 T: 2.80737 dT: 1.38713 del: +0.0ns
    1.51679 Node: 2 newBitRate: 89000 oldBitRate: 89000 estBitRate: 246766 interTime: 0 T: 2.75148 dT: 1.33306 del: +0.0ns
    ...
    95.931 Node: 0 newBitRate: 396000 oldBitRate: 396000 estBitRate: 427899 interTime: 0 T: 38.3269 dT: 0.175848 del: +0.0ns
    96.5143 Node: 1 newBitRate: 263000 oldBitRate: 263000 estBitRate: 282589 interTime: 0 T: 37.7488 dT: 0.139504 del: +0.0ns
    96.9279 Node: 2 newBitRate: 178000 oldBitRate: 178000 estBitRate: 197848 interTime: 0 T: 37.3404 dT: 0.12356 del: +0.0ns
    97.7929 Node: 0 newBitRate: 396000 oldBitRate: 396000 estBitRate: 424918 interTime: 0 T: 38.4651 dT: 0.138144 del: +0.0ns
    98.2967 Node: 1 newBitRate: 263000 oldBitRate: 263000 estBitRate: 275899 interTime: 0 T: 37.9664 dT: 0.217576 del: +0.0ns
    98.6872 Node: 2 newBitRate: 178000 oldBitRate: 178000 estBitRate: 200443 interTime: 0 T: 37.581 dT: 0.240664 del: +0.0ns
    99.5082 Node: 0 newBitRate: 396000 oldBitRate: 396000 estBitRate: 426879 interTime: 0 T: 38.7498 dT: 0.284736 del: +0.0ns
    ns3::FdashClient-Node: 0 InterruptionTime: 0 interruptions: 0 avgRate: 248101 minRate: 89000 AvgDt: 38.4632 changes: 7
    ns3::FdashClient-Node: 1 InterruptionTime: 0 interruptions: 0 avgRate: 175772 minRate: 89000 AvgDt: 37.577 changes: 5
    ns3::FdashClient-Node: 2 InterruptionTime: 0 interruptions: 0 avgRate: 120478 minRate: 89000 AvgDt: 36.4311 changes: 3
    

About

An MPEG/DASH client-server module for simulating rate adaptation mechanisms over HTTP/TCP.

License:GNU General Public License v2.0


Languages

Language:C++ 97.1%Language:Python 1.8%Language:CMake 1.1%