djpoker / RubberDucky-Reverse-Shell-Script-Working100---2024

RubberDucky-Reverse-Shell-Script-Working100---2024

Hi im Daniel ! This is a Fresh Netcat base Revese shell script for USB RubberDucky

CREATOR : Danial Javanrad Catergory : NETCAT REVERSE SHELL TO Windows CMD How to use : https://github.com/djpoker/RubberDucky-Reverse-Shell-Script-Working100---2024 GITHUB : https://github.com/djpoker DEVICE : RUBBER DUCKY

"EDUCATIONAL PURPOSE ONLY"

---

𝗜𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻 𝗮𝗻𝗱 𝘂𝘀𝗲 :

𝗜𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻 :

IF you are using an actual RUBBERDUCKY just copy and paste the payload file in the text file in the USB.

IF you use an Arduino USB Just Convert the payload to arduino code and boot it into your Arduino

---

𝗛𝗢𝗪 𝗧𝗢 𝗨𝗦𝗘 :

SETUP THE PAYLOAD:

1. Download the payload or copy it

2. Open the payload or paste it in an Text Editor

3. EDIT (YOUR IP) and (YOUR PORT) with yours

---

(OPTIONALS) you can skip these cause i've preset these:

1. EDIT Downloading Directory For NETCAT (make sure its direct download link with nc64.exe file ) or just leave it default
2. EDIT File Directory LINE 158 - 170 - 202 or just leave it default

---

𝗔𝗧𝗧𝗔𝗖𝗞𝗘𝗥:

1. install NetCat :

Linux : sudo apt install netcat-traditional

Windows: https://eternallybored.org/misc/netcat/ or https://nmap.org/ncat/

2. Run NetCat with Win/Linux and run this command:

Windows:

1. Open the NetCat app
2. TYPE: -lvp (YOUR PORT)

Linux:

1. Open Terminal
2. TYPE: nc -lvp (YOUR PORT)

---

𝗧𝗔𝗥𝗚𝗘𝗧:

Just Plug in The USB RUBBERDUCKY!