diy3dvn / grbl-plotter

GRBL Plotter, Adruino with GRBL Shield V3

grbl-plotter

GRBL Plotter, Adruino with GRBL Shield V3

Material:

• Arduino Uno R3
• GRBL Shield V3
• 2 Stepper Motor 1.8 degree
• 2 Stepper Driver A4988
• Tower Pro SG90 9g Micro servo
• Print Parts download from https://www.thingiverse.com/thing:3636085

Setup

• Download Arduino IDE from https://www.arduino.cc/
• Install and Open Arduino IDE
• Import MIGRBL.zip to libraries: Sketch > Include Library > Add .ZIP Library...
• Selected MIGRBL.zip to import
• Connect Arduino Uno R3 via USB cable, select File > Examples > MIGRBL > grblUpload
• Select correct information for board from Tools: Board: "Arduino/Genuino Uno" Port: USB port for Arduino Uno Programmer: "AVRISP mkll"
• Click to button Upload

Gcode Editor Tools Setup

• Download and setup Inkscape version 0.48.5 (https://inkscape.org/release/inkscape-0.48.5/)
• Unzip tools/MI Inkscape Extension.zip and copy all of file to inkscape extensions folder MAC: ~/.config/inkscape/extensions/ WINDOW: ...

Gcode Sender Tool

• GRBL Controller: https://github.com/zapmaker/GrblHoming/releases