dioptre / LSL_Neuromore

Connecting Muse headband to Neuromore Studio

Muse Neuromore

Connecting Muse headband to Neuromore Studio

The script redirects LSL stream to OSC, which Neuromore Studio takes as its input. Below is the instruction for Windows 10. For the other platforms the steps are similar, except no need for running BlueMuse, because muse-lsl can be used instead (https://github.com/alexandrebarachant/muse-lsl)

Prerequisites

1. Python 3 (tested with 3.7 version) with pylsl and python-osc packages installed
   pip install pylsl
pip install python-osc
   
2. BlueMuse https://github.com/kowalej/BlueMuse (tested with 2.0.0.0 version)
3. Neuromore Studio https://github.com/neuromore/studio (tested with 1.4.4 version)

Running the script

1. Connect the Muse headband to BlueMuse
2. Run python stream_data.py
3. Open Neuromore Studio and configure OSC Server (Edit -> Settings) to listen on input port 4545, address 0.0.0.0 (if everything runs on a local machine)
4. In the Studio create a Classifier and create 4 (or 5 for aux channel) OSC Input nodes
5. Configure each node to listen to one of the OSC addresses (/muse/tp9, muse/af7 etc.) and set the sampling rate to 256
6. To see the raw data: View -> Add -> Signal View

The Script should work for Muse 2 as well, alternative solution https://github.com/naxocaballero/muse2-neuromore