ide_adapter_1
44-pin 2mm pitch IDE host to two device adapter supporting cable select with optional physical byte swap header
Atari Falcon
This adapter is intended for use in my Atari Falcon which has an 44-pin 2mm-pitch IDE connection soldered to the board with only one connector for a hard disc.
This allows two discs to be added to the Falcon, if they support running in master/slave configuration, either via jumpers on the discs, or via cable select, which this board supports.
Byte Swap
This board also has an additional byte-swapped host header, which a suitable hard disc driver on the atari can make use of for faster interoperability with modern machines.
Youtube
My video demonstrating this and assembing it can be found here https://www.youtube.com/watch?v=6OSfqDosSyg
PCBWay
I have A PCBWay Profile where you may find & order this project: https://www.pcbway.com/project/member/?bmbno=2C89C44C-EDF4-43
Copyright 2023 D Henderson, released under the terms of the GPLv2