The Istio operator CLI is now suitable for developers to evaluate and experiment with. You can contribute by picking an unassigned open issue, creating a bug or feature request, or just coming to the weekly Environments Working Group meeting to share your ideas.
This document is an overview of how the operator works from a user perspective. For more details about the design and architecture and a code overview, see ARCHITECTURE.md
This repo reorganizes the current Helm installation parameters into two groups:
- The new platform level installation API, for managing K8s settings like resources, auto scaling, pod disruption budgets and others defined in the KubernetesResourceSpec
- The configuration API that currently uses the Helm installation parameters for backwards compatibility. This API is for managing the Istio control plane configuration settings.
Some parameters will temporarily exist in both APIs - for example, setting K8s resources currently can be done through either API above. However, the Istio community recommends using the first API as it is more consistent, is validated, and will naturally follow the graduation process for APIs while the same parameters in the configuration API are planned for deprecation.
This repo currently provides pre-configured Helm values sets for different scenarios as configuration profiles, which act as a starting point for an Istio install and can be customized by creating customization overlay files or passing parameters when calling Helm. Similarly, the operator API uses the same profiles (expressed internally through the new API), which can be selected as a starting point for the installation. For comparison, the following example shows the command needed to install Istio using the SDS configuration profile using Helm:
helm template install/kubernetes/helm/istio --name istio --namespace istio-system \
--values install/kubernetes/helm/istio/values-istio-sds-auth.yaml | kubectl apply -f -
In the new API, the same profile would be selected through a CustomResource (CR):
# sds.yaml
apiVersion: install.istio.io/v1alpha2
kind: IstioControlPlane
spec:
profile: sds
See Select a specific configuration_profile for more information.
If you don't specify a configuration profile, Istio is installed using the default
configuration profile. All
profiles listed in istio.io are available by default, or profile:
can point to a local file path to reference a custom
profile base to use as a starting point for customization. See the API reference
for details.
The quick start describes how to install and use the operator mesh
CLI command.
If you're trying to do a local build that bypasses the build container, you'll need to to execute the following step one time.
GO111MODULE=on go get github.com/jteeuwen/go-bindata/go-bindata@v3.0.8-0.20180305030458-6025e8de665b
To build the operator, simply:
git clone https://github.com/istio/operator.git
cd operator
make mesh
This will create a binary called mesh
in ${GOPATH}/bin. Ensure this is in your PATH to run the examples below.
The mesh
command supports the following flags:
logtostderr
: log to console (by default logs go to ./mesh-cli.log).dry-run
: console output only, nothing applied to cluster or written to files.verbose
: display entire manifest contents and other debug info (default is false).
The following command generates a manifest with the compiled in default profile and charts:
mesh manifest generate
You can see these sources for the compiled in profiles in the repo under data/profiles
. Charts/profiles
will be released separately and the
by default the mesh command will point to a version of the released charts.
The output of the manifest is concatenated into a single file. To generate a directory hierarchy with subdirectory levels representing a child dependency, use the following command:
mesh manifest generate -o istio_manifests
Use depth first search to traverse the created directory hierarchy when applying your YAML files. This is needed for correct sequencing of dependencies. Child manifest directories must wait for their parent directory to be fully applied, but not their sibling manifest directories.
The following command generates the manifests and applies them in the correct dependency order, waiting for the dependencies to have the needed CRDs available:
mesh manifest apply
The following commands show the values of a configuration profile:
# show available profiles
mesh profile list
# show the values in demo profile
mesh profile dump demo
# show the values after a customization file is applied
mesh profile dump -f samples/policy-off.yaml
# show differences between the default and demo profiles
mesh profile dump default > 1.yaml
mesh profile dump demo > 2.yaml
mesh profile diff 1.yaml 2.yaml
# show the differences in the generated manifests between the default profile and a customized install
mesh manifest generate > 1.yaml
mesh manifest generate -f samples/pilot-k8s.yaml > 2.yaml
mesh manifest diff 1.yam1 2.yaml
The profile dump sub-command supports a couple of useful flags:
config-path
: select the root for the configuration subtree you want to see e.g. just show Pilot:
mesh profile dump --config-path trafficManagement.components.pilot
set
: set a value in the configuration before dumping the resulting profile e.g. show the minimal profile:
mesh profile dump --set profile=minimal
The simplest customization is to select a profile different to default
e.g. sds
. See samples/sds.yaml:
# sds-install.yaml
apiVersion: install.istio.io/v1alpha2
kind: IstioControlPlane
spec:
profile: sds
Use the Istio operator mesh
binary to apply the new configuration profile:
mesh manifest generate -f samples/sds.yaml
After running the command, the Helm charts are rendered using data/profiles/sds.yaml
.
The compiled in charts and profiles are used by default, but you can specify a file path, for example:
apiVersion: install.istio.io/v1alpha2
kind: IstioControlPlane
spec:
profile: /usr/home/bob/go/src/github.com/ostromart/istio-installer/data/profiles/default.yaml
installPackagePath: /usr/home/bob/go/src/github.com/ostromart/istio-installer/data/charts/
You can mix and match these approaches. For example, you can use a compiled-in configuration profile with charts in your local file system.
The following command takes helm values.yaml files and output the new IstioControlPlaneSpec:
mesh manifest migrate /usr/home/bob/go/src/istio.io/installer/istio-control/istio-discovery/values.yaml
If a directory is specified, all files called "values.yaml" under the directory will be converted into a single combined IstioControlPlaneSpec:
mesh manifest migrate /usr/home/bob/go/src/istio.io/installer/istio-control
If no file is specified, the IstioControlPlane CR in the kube config cluster is used as an input:
mesh manifest migrate
The following command takes two manifests and output the differences in a readable way. It can be used to compare between the manifests generated by operator API and helm directly:
mesh manifest diff ./out/helm-template/manifest.yaml ./out/mesh-manifest/manifest.yaml
The new platform level installation API defines install time parameters like feature and component enablement and namespace, and K8s settings like resources, HPA spec etc. in a structured way. The simplest customization is to turn features and components on and off. For example, to turn off all policy (samples/sds-policy-off.yaml):
apiVersion: install.istio.io/v1alpha2
kind: IstioControlPlane
spec:
profile: sds
policy:
enabled: false
The operator validates the configuration and automatically detects syntax errors. Helm lacks this capability. If you are using Helm values that are incompatible, the schema validation used in the operator may reject input that is valid for Helm. Another customization is to define custom namespaces for features (samples/trafficManagement-namespace.yaml):
apiVersion: install.istio.io/v1alpha2
kind: IstioControlPlane
spec:
trafficManagement:
components:
namespace: istio-control-custom
The traffic management feature comprises Pilot and Proxy components. Each of these components has K8s settings, and these can be overridden from the defaults using official K8s APIs rather than Istio defined schemas (samples/pilot-k8s.yaml):
apiVersion: install.istio.io/v1alpha2
kind: IstioControlPlane
spec:
trafficManagement:
components:
pilot:
k8s:
resources:
requests:
cpu: 1000m # override from default 500m
memory: 4096Mi # ... default 2048Mi
hpaSpec:
maxReplicas: 10 # ... default 5
minReplicas: 2 # ... default 1
nodeSelector: # ... default empty
master: "true"
tolerations: # ... default empty
- key: dedicated
operator: Exists
effect: NoSchedule
- key: CriticalAddonsOnly
operator: Exists
The K8s settings are defined in detail in the operator API. The settings are the same for all components, so a user can configure pilot K8s settings in exactly the same, consistent way as galley settings. Supported K8s settings currently include:
- resources
- readiness probes
- replica count
- HorizontalPodAutoscaler
- PodDisruptionBudget
- pod annotations
- container environment variables
- ImagePullPolicy
- priority calss name
- node selector
- toleration
- affinity and anti-affinity
- deployment strategy
All of these K8s settings use the K8s API definitions, so K8s documentation can be used for reference. All K8s overlay values are also validated in the operator.
The new platform install API above deals with K8s level settings. The remaining values.yaml parameters deal with Istio control plane operation rather than installation. For the time being, the operator just passes these through to the Helm charts unmodified (but validated through a schema). Values.yaml settings are overridden the same way as the new API, though a customized CR overlaid over default values for the selected profile. Here's an example of overriding some global level default values (samples/values-global.yaml):
apiVersion: install.istio.io/v1alpha2
kind: IstioControlPlane
spec:
profile: sds
values:
global:
logging:
level: "default:warning" # override from info
Values overrides can also be specified for a particular component (samples/values-pilot.yaml):
apiVersion: install.istio.io/v1alpha2
kind: IstioControlPlane
spec:
values:
mixer:
telemetry:
loadshedding:
latencyThreshold: 200ms
Advanced users may occasionally have the need to customize parameters (like container command line flags) which are not exposed through either of the installation or configuration APIs described in this document. For such cases, it's possible to overlay the generated K8s resources before they are applied with user-defined overlays. For example, to override some container level values in the Pilot container (samples/pilot-advanced-override.yaml):
apiVersion: install.istio.io/v1alpha2
kind: IstioControlPlane
spec:
trafficManagement:
enabled: true
components:
proxy:
enabled: false
pilot:
k8s:
overlays:
- kind: Deployment
name: istio-pilot
patches:
- path: spec.template.spec.containers.[name:discovery].args.[30m]
value: "60m" # OVERRIDDEN
- path: spec.template.spec.containers.[name:discovery].ports.[containerPort:8080].containerPort
value: 8090 # OVERRIDDEN
- kind: Service
name: istio-pilot
patches:
- path: spec.ports.[name:grpc-xds].port
value: 15099 # OVERRIDDEN
The user-defined overlay uses a path spec that includes the ability to select list items by key. In the example above, the container with the key-value "name: discovery" is selected from the list of containers, and the command line parameter with value "30m" is selected to be modified. The advanced overlay capability is described in more detail in the spec.
See ARCHITECTURE.md