Varnish Security Firewall

This is work in progress just like any security app should be. Use at your own discretion.

The Varnish Security Firewall (VSF) is a Web Application Firewall (WAF) written using the Varnish Control Language (VCL) and a sprinkling of Varnish Modules (vmods).

VSF aims to provide:

A standardized framework for security-related filters
Several core rule-sets
A limited set of default 'handlers', for instance CGI scripts to call upon when Bad Stuff happens.

This is done mainly by using clever VCL, and with as little impact on normal operation as possible. The incident handlers can be CGI-like scripts on a backend.

Quick Start

To use VSF you will need the parsereq, shield, throttle and urlcode vmods, which in turn require the Varnish 3.x source code to compile and run.

Build Varnish

build-essential libpcre3-dev
wget http://repo.varnish-cache.org/source/varnish-3.0.3.tar.gz
tar xf varnish-3.0.3.tar.gz && cd varnish-3.0.3 && ./configure
make -j3 && make install
cd -

then

Build VMods

for mod in parsereq urlcode shield throttle; do
   cd libvmod-$mod
   ./autogen.sh && VARNISHSRC=../varnish-3.0.3 ./configure && make -j3
   make install
   cd -
done

now symlink the vcl directory into /etc/varnish/security

cd /etc/varnish && ln -s /PATH/TO/VSF/vcl security

then you edit your default.vcl and add this line near the top:

include "/etc/varnish/security/vsf.vcl";

At this point, you should only need to reload your varnish configuration.

You may want to modify config.vcl to fit your needs. Remember that paths must be hardcoded and absolute.

The Architecture

VSF works by including all rulesets, then defining a number of standard functions. Each rule will set X-VSF-Severity = "N", where N is the severity, and call sec_handler which in turn typically calls error or some other handler.

Handlers

The general concept is that VSF either throws an error (vcl_error) of some kind, which can return a redirect the client, or do any other synthetic response, or VSF can log, rewrite the original request and send it to a backend designed to do more clever things, like:

Block the client in a firewall
Log the event
Test-run the code.
Paint you a pretty picture...

There are several handlers defined and you can set the default handler in handlers.vcl. The default handler rejects detected malicious traffic.

Also you may write your own handler, see handlers.vcl

Known Issues

Let us know! http://github.com/comotion/VSF/issues

References

This work is based on the work of:

VFW https://github.com/scarpellini/VFW

by Eduardo S. Scarpellini

Security.VCL https://github.com/comotion/security.vcl

by Kristian Lyngstøl, Edward B. Fjellskål and Kacper Wysocki

As well as the authors of the following VMODs:

Syohei 'xcir' Tanaka: https://github.com/xcir/libvmod-parsereq.git
1. 'nand2' Deschildre: https://github.com/nand2/libvmod-throttle.git
Rogier 'DocWilco' Mulhuijzen: https://github.com/fastly/libvmod-urlcode.git
Varnish Software ('martin'): https://github.com/varnish/libvmod-shield.git

and the Varnish Cache by Poul-Henning Kamp, of course ;-)

Future Work

Unicode codepoints must be normalized to the shortest-byte representation to effectively combat WAF evasion.

http://www.symantec.com/connect/articles/ids-evasion-unicode

solution: http://www.public-software-group.org/utf8proc

http://www.public-software-group.org/pub/projects/utf8proc/v1.1.5/utf8proc-v1.1.5.tar.gz

Write a handler to redirect triggered requests to a honeypot rather than bugging out. A handler could also do signature-based recognition of the client/attacker.

dewback / VSF