A TYPO3 Extension with tools that can be helpful when migrating an existing TYPO3 website made with TemplaVoila to Fluidtemplate and Grid Elements
- Module to mark all unreferenced elements as deleted
- Module to convert references to "insert records" elements
- Module to migrate the content of a flexible content element to a Grid Element
- Module to migrate content from TemplaVoila columns to Fluidtemplate columns
- Module to convert GridElements where the language is set to "all languages"
- Module to fix the sorting of translated content elements
This extension should be used by TYPO3 integrators with good knowledge of TemplaVoila, Fluidtemplates, Grid Elements and TypoScript.
- A full backup of your TYPO3 website (database and files)!
- TemplaVoila version 1.8+ installed and with old page module enabled
- ExtBase and Fluid installed
- Grid Elements installed (please ignore conflict with TemplaVoila!)
The following settings are available in the extension settings.
rootPid
If this field is set to a valid PID from the page tree, only this page and all subpages will be included during all migration steps.
Default value: empty
includeNonRootPages
Only respected, when rootPid is empty. If set, also non root pages are selected from the pagetree
when the extension selects TYPO3 pages to be included in the migration.
Default value: off
pagesDepthLimit
The page depth limit for fetching subpages from the pagetree when the extension selects TYPO3 pages to be included in the migration process.
Default value: 99
- Create Grid Elements for all Flexible Content Elements you wish to migrate
- Create backend layouts and Fluidtemplates for all TemplaVoila page templates you wish to migrate
- Delete all unreferenced elements
- Convert references to "insert records" elements
- Delete all unreferenced elements (conversion of references to FCE elements to insert records creates new unreferenced elements)
- Migrate all Flexible Content Elements to Grid Elements
- Migrate all TemplaVoila page templates to Fluidtemplate
- Delete TemplaVoila-Folder General Record Storage Page from root page
- Remove TemplaVoila
- Optionally convert GridElements with "all languages"
- Optionally fix the sorting of translated content elements
Many users working with TemplaVoila think, that the "unlink" function for content elements deletes the desired content elements. Actually, the content element only gets unlinked from the TemplaVoila layout and persists on the page. On the TemplaVoila tab "Non-used elements" all content elements are shown which that are not linked on the actual page.
When migrating a TYPO3 website from TemplaVoila to Fluidtemplate, all unreferenced elements should be deleted, since they are not shown on the output page. You can use this module to perform this action.
The action can safely be used, since it only flags all unreferenced elements as deleted.
This module searches recursive on all pages for TemplaVoila reference elements and converts them to "insert records" elements.
This module replaces the setting "Create shortcut element for TV references" which was an optional setting in tv2fluidge < version 0.4.x.
You should use this module before you start with migration of Flexible Content Elements and page content.
This module migrates content from a Flexible Content Element to an existing Grid Element. If the Flexible Content Element contains content columns, they can be remapped to content columns of the target Grid Element.
Before you can start with the migration, you must create a Grid Element for each Flexible Content Element you wish to migrate. If your Flexible Content Element contains JavaScript, you should include this somewhere in you page TypoScript or Grid Element TypoScript.
Flexible Content Elements with content columns only
If your Flexible Content Element only constists of content columns (e.g. 2 column FCE), you should create a new Grid Element with number of content columns from your Flexible Content Element
Flexible Content Elements with flexform only
If your Flexible Content Element only constists of flexform fields (input, images, TypoScript, ...), you should create a new Grid Element and insert the flexform XML from the Flexible Content Element in the Grid Element.
When creating the TypoScript for the new Grid Element, you can use field:flexform_ to get the flexform values.
Example:
20 = TEXT
20.data = field:flexform_myfieldname
Flexible Content Elements with mixed flexform and content columns
If your Flexible Content Element contains a mix of content columns and flexform, you should create a new Grid Element and and insert the flexform XML from the Flexible Content Element in the Grid Element.
Then setup the Grid Element like shown in the below.
Example:
1 < lib.gridelements.defaultGridSetup
1 {
columns {
# colPos ID
0 < .default
0.wrap = <div class="content">|</div>
}
wrap.stdWrap.cObject = COA
wrap.stdWrap.cObject {
10 = TEXT
10.data = field:flexform_myfieldname
}
}
To migrate a Flexible Content Element, just select it from the "Flexible Content Element" select box in the module. Next you must select a target Grid Element in the "Grid Element" select box.
If your Flexible Content Element contains content columns, then you can remap them to content columns in the target Grid Element.
The FCE migration module finds all Flexible Content Elements of the selected type, changes the content type
to GridElement and sets the selected backend layout for the Grid Element. Then it copies the content from
tx_templavoila_flex to pi_flexform. If the selected Flexible Content Element has content columns, then all
content elements will be mapped to the selected content columns of the target Grid Element.
This module migrates content from TemplaVoila content columns to backend layout content columns based on Fluidtemplate. After the content migration, the selected backend layout gets assigned to the "Backend Layout" select boxes.
It also migrates flexform fields (e.g. textfields or images, which are used in your frontend output). The flexform fields will be migrated to the Database fields, if those fields exist. If the corresponding field does not exist, they will be ignored.
Before you can start with the migration, you must create a backend layout and Fluidtemplate for each TemplaVoila page template you wish to migrate.
For TemplaVoila templates with only content columns, you should just create backend layouts and Fluidtemplates with the same amount of content columns. Be sure to set a decent name to each content column, so you later can identify them when remapping from TemplaVoila content columns to backend layout content columns.
It is important to check, that both dropdown boxes for the TemplaVoila Template Design contains a template. So make sure "Use Template Design" and "Subpages - Use Template Design" contains a valid template.
If your TemplaVoila template contains FlexForm fields (e.g. input, images, ...) and you want to keep them then you should create database fields for them (in table "pages" and "pages_language_overlay"). Those fields need to be named as the fields in the FlexForm but can contain a prefix (which can be specified per template).
To migrate content from TemplaVoila, just select the TemplaVoila Page Template the "TV Page Template" select box in the module. Next you must select a target backend layout in the "Backend Layout" select box. Finally remap all content columns from the TemplaVoila Page Template to the target content columns of the backend layout.
After content migration, you should not rearrage or create new content elements on pages with a Fluid Template, when TemplaVoila is still installed. TemplaVoila uses a method named correctSortingAndColposFieldsForPage, which may move all content elements to column 0.
The content migration module finds all pages with the selected TemplaVoila Page Template and remaps all content elements to the selected target content columns of the backend layout. After the content migration, the selected backend layout gets assigned to the "Backend Layout" select boxes.
After the content migration, you should check in the TYPO3 backend, that content elements in the page module have the correct ordering. If this is not the case, you have to manually reorder all translated content elements.
On multilingual sites made with TemplaVoila you can set the language FCEs to "all languages" and translate multilingual content directly inside the FCE container. Using backend layouts and GridElements this can cause some problems after migrating of a TemplaVoila site with this extension and I would recommend to use a translated Grid Element for each page language.
This converter clones Grid Elements with "all languages" so you have individually translated Grid Elements for each page translation. The conversion process also reassigns all child content elements of the original Grid element to the now translated Grid Element.
This module should only be used when the following steps are processed:
- Migration of TemplaVoila Flexible Content Elements to GridElements
- Migration of content from TemplaVoila to Fluid Template
- It is recommended to create a backup of your TYPO3 database, so you can easily roll back if the conversion fails
Atfer the conversion, you should use the module "Fix sorting" to apply the sorting of the original content elements to the translated content elements.
If the original Flexible Content Elements used flexform fields (e.g. textfields or imagefields), the migration
will also modified the FlexForm to use lDEF and vDEF only, so one has to set
<langDisable>1</langDisable> to the flexform of your GridElement
Also check, if you have content, which does not have a default language. In this case, your TypoScript Setup
should not contain sys_language_overlay = hideNonTranslated
Or in TYPO3 v6.2 one can keep this setting but also
needs to use the new TypoScript option: select.includeRecordsWithoutDefaultTranslation,
see http://docs.typo3.org/typo3cms/TyposcriptReference/Functions/Select/Index.html
If css_styled_content is used this option could be used the following way:
styles.content.get.select.includeRecordsWithoutDefaultTranslation = 1
styles.content.getLeft.select.includeRecordsWithoutDefaultTranslation = 1
styles.content.getRight.select.includeRecordsWithoutDefaultTranslation = 1
styles.content.getBorder.select.includeRecordsWithoutDefaultTranslation = 1
You should only use this module, if the sorting of content elements after the migration is different to the original state.
This module sets the sorting to all translated content elements, so it will be the same as for the original content element.
This module should only be used when the following steps are processed:
- Migration of TemplaVoila Flexible Content Elements to GridElements
- Migration of content from TemplaVoila to Fluid Template
- Conversion of Grid Elements with language set to "all languages"
- It is recommended to create a backup of your TYPO3 database, so you can easily roll back if the result is not as expected
The extension is hosted on GitHub. Please report feedback, bugs and changerequests directly at https://github.com/derhansen/sf_tv2fluidge
At the time of writing, there is no fully working version of TemplaVoila available for TYPO3 7.6 LTS. If you plan to migrate to Fluidtemplate and Gridelements using sf_tv2fluidge, I recommend to do the migration before the TYPO3 6.2 -> 7.6 core update.