derchrisuk / internet-pi

Raspberry Pi config for all things Internet.

Internet Pi

A Raspberry Pi Configuration for Internet connectivity

I have had a couple Pis doing random Internet-related duties for years. It's finally time to formalize their configs and make all the DNS/ad-blocking/monitoring stuff encapsulated into one Ansible project.

So that's what this is.

Features

Internet Monitoring: Installs Prometheus and Grafana, along with a few Docker containers to monitor your Internet connection with Speedtest.net speedtests and HTTP tests so you can see uptime, ping stats, and speedtest results over time.

Pi-hole: Installs the Pi-hole Docker configuration so you can use Pi-hole for network-wide ad-blocking and local DNS. Make sure to update your network router config to direct all DNS queries through your Raspberry Pi if you want to use Pi-hole effectively!

Other features:

• Shelly Plug Monitoring: Installs a shelly-plug-prometheus exporter and a Grafana dashboard, which tracks and displays power usage on a Shelly Plug running on the local network. (Disabled by default. Enable and configure using the shelly_plug_* vars in config.yml.)
• AirGradient Monitoring: Installs an airgradient-prometheus exporter and a Grafana dashboard, which tracks and displays air quality over time via a local AirGradient DIY monitor. (Disabled by default. Enable and configure using the airgradient_enable var in config.yml. See example configuration for ability to monitor multiple AirGradient DIY stations.)
• Starlink Monitoring: Installs a starlink prometheus exporter and a Grafana dashboard, which tracks and displays Starlink statistics. (Disabled by default. Enable and configure using the starlink_enable var in config.yml.)

IMPORTANT NOTE: If you use the included Internet monitoring, it will download a decently-large amount of data through your Internet connection on a daily basis. Don't use it, or tune the internet-monitoring setup to not run the speedtests as often, if you have a metered connection!

Recommended Pi and OS

You should use a Raspberry Pi 4 model B or better. The Pi 4 and later generations of Pi include a full gigabit network interface and enough I/O to reliably measure fast Internet connections.

Older Pis work, but have many limitations, like a slower CPU and sometimes very-slow NICs that limit the speed test capability to 100 Mbps or 300 Mbps on the Pi 3 model B+.

Other computers and VMs may run this configuration as well, but it is only regularly tested on a Raspberry Pi.

The configuration is tested against Raspberry Pi OS, both 64-bit and 32-bit, and runs great on that or a generic Debian installation.

It should also work with Ubuntu for Pi, or Arch Linux, but has not been tested on other operating systems.

Setup

1. Install Ansible. The easiest way (especially on Pi or a Debian system) is via Pip:
   1. (If on Pi/Debian): sudo apt-get install -y python3-pip
   2. (Everywhere): pip3 install ansible
2. Clone this repository: git clone https://github.com/geerlingguy/internet-pi.git, then enter the repository directory: cd internet-pi.
3. Install requirements: ansible-galaxy collection install -r requirements.yml (if you see ansible-galaxy: command not found, restart your SSH session or reboot the Pi and try again)
4. Make copies of the following files and customize them to your liking:
   • example.inventory.ini to inventory.ini (replace IP address with your Pi's IP, or comment that line and uncomment the connection=local line if you're running it on the Pi you're setting up).
   • example.config.yml to config.yml
5. Run the playbook: ansible-playbook main.yml

If running locally on the Pi: You may encounter an error like "Error while fetching server API version". If you do, please either reboot or log out and log back in, then run the playbook again.

Usage

Pi-hole

Visit the Pi's IP address (e.g. http://192.168.1.10/) and use the pihole_password you configured in your config.yml file.

Grafana

Visit the Pi's IP address with port 3030 (e.g. http://192.168.1.10:3030/), and log in with username admin and the password monitoring_grafana_admin_password you configured in your config.yml.

Note: The monitoring_grafana_admin_password is only used the first time Grafana starts up; if you need to change it later, do it via Grafana's admin UI.

Updating

To upgrade Pi-hole to the latest version, run the following commands:

cd ~/pi-hole # 
docker-compose pull             # pulls the latest images
docker-compose up -d --no-deps  # restarts containers with newer images
docker system prune --all       # deletes unused images

Upgrades for the other configurations are similar (go into the directory, and run the same docker-compose commands. Make sure to cd into the config_dir that you use in your config.yml file.

At some point in the future, a dedicated upgrade playbook may be added, but for now, upgrades may be performed manually as shown above.

Backups

A guide for backing up the configurations and historical data will be posted here as part of Issue #194: Create Backup guide.

License

MIT

Author

This project was created in 2021 by Jeff Geerling.