Mazlum Deniz Yüce's starred repositories
RUT2CLOUD_Rev4_Hardware
RUT2CLOUD Project with STM32WB55, GL865-DUAL V3.1, SL876Q5-A, On-Board ST-Link
stm32-dfu-bootloader
A DFU bootloader targeting STM32F103 in just 4KB
52810-PWM-for-WS2812-LED-
NRF52810 is used to drive ws2812 LED light bar, based on SDK16.0
NRF52840_WS2812B
Example code for using Nico's ws2812b library for the nrf52840 Microcontroller. This example code works out of the box with the IAR workbench, J-Link debugger/programmer and the Adafruit Featherboard nrf52840 with the integrated ws2812b led. Amount of leds and the pins on which they are connected to can be set in the ws2812b library. The ws2812b leds are controlled by the pwm peripheral. Depending on the dutycycle the ws2812b leds interprets a 1 or 0 bit and holds a 24 bit shiftregister. The 24 bits are splittet into red (8b), green (8) and blue (8b). Bits are being shiftet through all leds connected in serial. After finishing the shifting, the line needs to be set low for at least 50 us, so the leds accept their shift registers thus emitting their colours. The library is heavily ram consuming because the pwm sequence arrays are defined as 16bit uints and 1 ws2812b bit is used as array entity. A future version will solve this issue.
stm32-ws2811-ws2812-ws2812b-ws281x-tim-pwm-dma-timer
WS2811, WS2812, WS2812B or compatible leds driver with STM32, TIM, PWM and DMA with minimum RAM required
stm32-nucleo144-f7-iks01a1
Nucleo-144-F746ZG + IKS01A1 Shield Example
Arduino-FOC
Arduino FOC for BLDC and Stepper motors - Arduino Based Field Oriented Control Algorithm Library
RFM69_LPC812_firmware
C firmware for LPC812 MCU driving RFM69/RFM9x family of radio modules
LPC810_CodeBase
Open source code base for the ARM Cortex M0+ LPC810 family from NXP
BMP280_STM32
BMP280 / BME280 driver STM32 HAL I2C
stm32-bme280
Bosch BME280 driver for STM32 using HAL - both SPI and I2C work
STM32-MPU6050-MPU9250-I2C-SPI
STM32 MPU6050/9250 I2C and SPI interface. Sensor fusion using a complementary filter yields sensor Euler angles and is implemented in both C and CPP.
stm32_hal_ibus
Flysky Ibus protocol library with STM32 HAL driver
STM32F1-USB-SD
Using a STM32F103 as a SPI based SD card reader example.