Serendipity is a collaboration between dededecline and liv
Photos by group buy participants can be found here!
More info can be found on the Geekhack interest check.
- Back Case Screws: 4x m3x14mm
- Front Case Screws: 4x m3x8mm
- Weight Screws: 2x m3x5mm countersunk
- Plate Screws: 8x m3x8mm
- Badge Screws: 2x m2x5mm
- DB Screws: 4x m2x5mm
- O-Rings: 16x 1.5mmx2.5mm, 70 duro recommended
- Feet: 2x Geonworks 60% feet
The o-rings are required for the build to work properly. For each plate screw, one o-ring goes between the top case piece and the plate, and another goes between the plate and the screw head. Do not overly tighten plate screws.
All files required for manufacturing are present in this repository.
All relevant information about the board should be in the Geekhack interest check.
These components have been tested and confirmed to work properly. I am not liable for any issues stemming from usage of these files. Order at your own risk. Support will not be provided, but pull requests will be reviewed and possibly accepted.